Why does my electric keep tripping?

Your current or circuit breakers can trip because of four major reasons, and they include:

• Circuit overload
• Short circuit
• Ground faults
• Faulty circuit breaker

Circuit overload

Circuit overload is when you plug too many appliances into a circuit than it can carry. Whenever there is more load on a circuit than rated, the circuit breaker trips to prevent electrical hazards.

Short circuit

A short circuit occurs when a hot wire and neutral wire bridges. This contact causes high current flow along the line, generating more heat than what the circuit can handle. When such happens, the breaker trips off the current to avert damage to electrical appliances. Short circuits may occur for several reasons, such as loose connections, damaged electrical insulators, faulty switches and appliances.

Grounds fault

Ground faults occur when a hot wire comes into contact with the earth wire. The contact pushes more current to the circuit than it can handle, causing your circuit breaker to switch off. Ground faults can lead to electrical shock if left unchecked.

Faulty circuit breaker

If none of the above is causing your circuit breaker trip, it may mean that your breaker/outlet has gone bad. A bad circuit breaker can cause your lights to go off unexpectedly. If your power failure is due to a bad outlet, replace it with a new circuit breaker. Consult an electrician to fix the issue for you.   For more details, check this article on why circuit breaker keeps tripping even without a 

Nothing is happening when you go to plug something in or reach to turn on a switch. Possibly your circuit breaker tripped once more. Of course, you could simply reset the circuit breaker each time it trips. It would be better if you could identify the root of the issue and resolve it permanently. If it keeps tripping when you try to plugin your electric kettle then there could be a slight concern. Here is all you should know if you are wondering why does my electric keep tripping at night.

Check the electrical wiring of your house from the expert electricians here. Pay your electricity bills via NoBroker to get assured cashback.

Why does my ELCB keeps tripping?

1) Ground Faults

When you try to ground your wire, this error happens. The issue is comparable to short-circuiting even though not identical. The interaction is where the volatility happens. A short circuit occurs when two "hot wires" make contact with one another, whereas a ground fault occurs when a hot wire makes contact with the ground wire, leaving the outlet's protective "grounding" ineffective and dangerous. So you must immediately call an electrician for this malfunction.

2) Failure of the appliances

An appliance that is damaged, defective, or malfunctioning typically consumes more energy than it should and can result in overloading. When a breaker trips, it's best to check all connected appliances to discover if the malfunctioning device was the cause. It will get significantly warmer than usual.

3) Overloads

Circuit overload is the most frequent cause of breaker trips. This occurs when the safety limit of the power supply to your appliances is exceeded due to an overload of equipment on the breaker. This frequently occurs when a new appliance that the electrical system cannot support is installed, or when high-power equipment is plugged into a location without access to safe current.

4) Short-circuiting

When two active wires come into contact with one another, short-circuiting happens. Typically, blackening surrounding the outlet or the smell of burned wiring are the visible symptoms of this happening. Avoid touching the outlet, leave the breaker tripped, and call a qualified electrician to come to help you if you detect short-circuiting.

I hope you understood the query about why does my electric keep tripping.

Read More: Which company wire is best for house wiring? How much does it cost for electrical wiring? Which wire is best for house wiring?