How to Use DR Fixit 302 Super Latex?

Last week I noticed some water leakage in my bedroom walls and I planned to contact a mason to solve the issue. My uncle, who was visiting us at the time, asked me not as he was aware of how to solve it. He told me that through Dr Fixit 302 Super Latex use, I can easily solve the problem. Following that, he told me the steps to use it. 

Dr. Fixit 302 How To Use?

He told me to follow the steps below to fix the water leakage issue. 

• He told me to clean the surface with a wire brush to remove hidden dirt, etc. 

• After that, he asked me to mix super latex, water, and cement in a ratio of 1:4:7. 

• Then he asked me to use a Brush and apply the 1st coat of the area. 

• Following that, I had to let it dry for 4-6 hours. 

• After that, he told me to apply a second coat of the mixture. 

• Leave it for another 4-6 hours. 

• Then, to protect the second coat, he asked me to overlay the second coat with plaster. 

And that’s about it for Dr. Fixit 302 Super Latex how to use. My uncle also told me that it could be used for

, waterproofing, etc. 

Following that, he also told me about the benefits of Dr. Fixit Super Latex 302 use. 

• It can be used for plaster and repair works. This is because Dr.Fixit has great bonding strength. 

• This product also helps in preventing cracks and improves

  abrasion resistance of the surface.

I hope this information about Dr Fixit 302 Super Latex use has been of help to you.