icons

Login / Sign up

Zero Brokerage.

Thousands of new listings daily.

100 Cr+ Brokerage saved monthly.

Enter phone to continue

Change Phone
Get updates on WhatsApp

Experience The NoBrokerHood Difference!

Set up a demo for the entire community

Thank You For Submitting The Form
Q.

How to Apply Putty on Old Painted Wall?

view 34 Views

1

20 days

Comment

whatsapp [#222222128] Created with Sketch. Send
Summary
To apply putty on an old painted wall, first inspect and remove loose paint, then clean, sand, and repair cracks or holes. Once the surface is clean and dry, apply bonding primer if needed, let it dry completely, and apply suitable wall putty according to the manufacturer’s directions. For glossy or semi-gloss paint, lightly sand with 180–220 grit sandpaper to improve putty adhesion.
1 2026-08-19T09:34:41+00:00
Best Answer

To apply wall putty to an old painted wall, clean and sand the surface first, then remove loose paint, patch cracks, and add primer if necessary. This allows the putty to bind correctly and offers a smoother finish. When I hired a professional painter, I observed the process he followed. So, I have shared detailed steps on how to apply putty on old painted wall below.

How to Apply Wall Putty on an Old Wall?

  1. Inspect the condition of the original paint.

    Ensure that the existing paint is securely bonded to the wall. 

    • To find loose paint, scratch the surface or test the area with adhesive tape. 

    • If the paint peels or comes off, scrape it before applying the putty. 

  2. Clean the walls.

    To remove grime, grease, and chalky residue, clean the surface with a mild detergent solution using a sponge or cloth. Rinse with clean water and allow the wall to dry completely.

  3. Sand and rough up the surface.

    Lightly sand glossy or semi-gloss paint with fine-grit sandpaper, approximately 180-220 grit. This results in a slightly rough surface that improves the putty bond.

  4. Repair the cracks and holes.

    Do not use wall putty to repair serious cracks or large holes.

    • Repair those places first using an appropriate cement-based repair mortar or crack filler.

    • Then allow the material to set completely. 

  5. Apply primer.

    Adding one layer of a good bonding primer is optional, but suggested.

    • It can help build a stronger bond between the old painted surface and the new putty.

    • Let the primer completely dry before proceeding. 

  6. Apply the wall putty.

    Once the prepared surface is clean and dry, apply a suitable wall putty as per the manufacturer's directions. The type of putty used should also be determined by whether the wall is internal or external.

For my 1,000 sq. ft. of wall area, the painter charged around Rs. 10 per sq. ft., which brings the total cost to Rs. 10,000. I hope this helps.

Avail NoBroker Putty Application Service for Your Old Painted Wall at Low Cost.
Flat 25% off on Home Painting
Top Quality Paints | Best Prices | Experienced Partners