How to remove moisture from walls?

Just before Delhi's monsoon arrived, I discovered a wet wall in my living room. To fix it, I looked into how to get rid of moisture in walls. I discovered that utilising a fan is the most efficient technique to get moisture off walls. If you are also struggling with a musty smell and moist walls, follow the below tips to remove it.

Get Free Estimate

How to Get Rid of Moisture from Walls?

Preventing water seepage into walls becomes crucial as the monsoon approaches. If you have a roof leak or plumbing leak, the issue may worsen because condensation from the air may build on the walls.

Fans facilitate faster air circulation and the drying off of wet walls. To remove the moisture problem in my wall, I follow the below method:

• I positioned two fans in the direction of the wet wall to help remove the moisture.

• I opened the windows and doors and put the fans to their highest setting to allow the fresh air to flow.

• Finally, I left the fans running until all of the moisture was gone from the wall.

Alternatively, you can also use damp proofing paint to remove the moisture. Prior to attempting to remove the moisture from the wall, it is crucial to address the source of the leak, if it is a leaking pipe or roof. For that, you can follow the tips mentioned by Venkateshwar. I hope this helps you get an idea of how to get rid of wall moisture.

Are you also dealing with the wet wall? Well, I had been dealing with it for the longest time. But don’t worry. Dampness or wet wall is one of the most common problems in residential or apartment buildings. Dampness generally leads to the growth of bacteria and molds, and creates an unhealthy environment to live in. Let me tell you how to remove moisture from walls:

Your home’s exterior walls face the brunt of the weather so painting them with normal pigmented solutions is not enough. I recommend you apply a waterproof coating on the walls to prevent leakage or seepage. For interior walls, you can use waterproofing primers to prevent moisture from showing up on the painted surfaces.

A dehumidifier is just like a vacuum cleaner that sucks in air from your home’s interior; takes the moisture out of it, and gives it back out into the room. The moisture collected goes into the basin that you can empty regularly.

You are going to have wet walls in case the steam from the kitchen or bathroom shower is not vented to the outside. It would generally be on walls that are near to the kitchen or bathroom. Mold and moisture develop quickly on flat latex paint, compared to the paint in the kitchen and bathroom.

Ensure that the rainwater doesn’t penetrate through the structure joints. You need to get attic ventilation in case there is attic space between the roof and the ceiling. You should also fit the joints of the rainwater pipes properly and tightly to prevent leakages in the joints.

I hope I cleared all your doubts regarding how to remove moisture from brick walls.