All my bathrooms have marble flooring. Why? Because there is nothing more elegant than a marble floor. With its veining design and glossy exterior, it adds a sense of royalty to my home. One thing I usually hear from people is that it’s hard to clean marble floors. But I don’t agree with them. It’s very easy. Read below to know how to clean marble floor in bathroom:Things You Require
Masking tape
Plastic wrap
Talc, powdered white chalk, or diatomaceous earth
Measuring cup
Soft-bristled scrub brush, non-abrasive sponge, or soft cloth
Bucket
Stone cleaner
Broom or dry mop
Dishwashing liquid
Baking soda
How to Clean Bathroom Marble Floor Stains: Easy Process
Dry mop or sweep the floor to remove surface dirt and dust.
Mix dishwashing soap and three tbsp baking soda to 1 quart of warm water.
Fill a bucket with regular tap water.
Dip a soft-bristled scrub brush, nonabrasive sponge, or soft cloth into the soapy water and scrub the marble floors. After that, rinse the brush, sponge, or cloth in regular water. Don’t forget to empty and refill the bucket when the water becomes dirty.
Measure one cup talc, powdered white chalk, or diatomaceous earth. Add water to the powder and stir properly until the paste becomes as consistent as cake frosting.
Now, sprinkle distilled water on the stained area and spread the paste over stains carefully.
Cover all stains with plastic wraps, and use the masking tape on the edges.
Let it dry for approximately one to two days.
Remove the plastic wraps and remove the paste with a wet sponge or cloth.
I’ve provided a step-by-step instruction on how to clean bathroom floor marble. To maintain the natural beauty of a marble bathroom floor, gentle cleaning is necessary.
How to Clean the Marble Floor in Bathroom?
Follow these steps to assist you with how to clean dirty marble floor of bathroom;
Clear the Area:
To gain access to the full marble floor, remove any mats, rugs, or other items.
Dust and Sweep:
To get rid of loose dirt, dust, and debris from the floor, start with dry dusting or sweeping. Use a dry microfiber mop or a gentle broom to clean.
Get a cleaning solution ready:
Warm water should be combined with a small amount of mild, pH-neutral dish soap or a dedicated marble cleaner in a bucket. It is because they can harm marble, abrasive or acidic cleansers should be avoided.
Mop or wipe the marble floor:
mop by carefully by dipping a soft mop or cloth into the cleaning solution, wringing out the excess water, and then doing so. Avoid giving the marble a thorough soak since too much water can harm the seams.
Grout and Stains:
Gently scrape discoloured grout or difficult-to-remove stains with a soft bristle brush. Take care not to damage the marble.
Rinse:
Fill the bucket with fresh, warm water after emptying it. To get rid of any soap residue, properly rinse the mop or cloth and wipe the floor.
Completely dry the marble floor with a dry microfiber towel or cloth:
Verify that there are no lingering water stains.
Optional sealing:
To shield your marble floor from spills and moisture, consider adding a marble sealer.
How to clean marble floor in bathroom?
Neelu
✔In Progress
👁381
Views
October 20, 2021
2021-10-20T17:28:42+00:00 2023-10-12T21:30:17+00:00Comment
2
Answers
Cleaning
Share