How to Use Dr Fixit Waterproofing for Terrace?

A home is your paradise. And if it is not waterproof it can get you into deep trouble. So how to waterproof a home? Well, I had leakage on my rooftop a year ago and one of my friends suggested that I should use Dr Fixit. Dr Fixit is a strong and waterproofed product that can help you get rid of leakage in the house. Not only the roof, but it can also help you fix your water tank as well. Dr Fixit is a very handy product and I will tell you how to use Dr Fixit waterproofing for terrace. Read on to know about

Dr Fixit terrace waterproofing technique.

How to use Dr Fixit waterproofing for terrace: Step by step guide

1. Chip off the top layer at least 10-15mm. Sweep the dust and water the portion.

2. Prepare cement slurry with Dr Fixit.

3. You have to make the concrete by mixing cement: sand: 10mm aggregate in a 1:1.5:3 ratio. Keep on adding latex for 100 ml per cement bag when you mix with water. Level the portion down by pouring the concrete with a wooden batten.

4. Allow the retain as ponding for at least 10 days.

This is the process I have followed for Dr Fixit terrace waterproofing.

Read more:

Dr Fixit is an additive that helps to prevent water seepage. We needed to get our roof waterproofed, so we hired an expert painter to execute the task properly. I watched his entire process using Dr Fixit, so let me tell you Dr Fixit roofseal how to apply. 

How to Use Dr Fixit for Roof Leakage?

I had no idea about how to use Dr Fixit roof waterproofing until I saw the expert painter using it. He assured me that it was a good product and effective in preventing water leakage from the roof. Here is how you can use it: 

• Start by cleaning the roof surface thoroughly. There should be no dirt, debris, or loose particles remaining.

• Then apply a primer to the surface. This will enhance adhesion and provide even coverage.

• Then start preparing the Dr. Fixit waterproofing solution. You should follow the manufacturer's instructions for it

• Next, use a brush, roller, or spray item and apply the waterproofing solution evenly to the entire roof of your house.

• Apply multiple coats as required. Just make sure each coat is allowed to dry completely before applying the next coat.

• Now allow the waterproofing layer to cure and leave it for around 24-48 hours.

• Check the waterproofed area for any imperfections or missed spots, and reapply if necessary.

So these are the simple steps that need to be followed to use Dr Fixit properly and prevent water leakage from the roof. You can hire an expert to execute the task properly.

Read More: