How to Clean Dirty Floor Tile Grout?

To clean dirty grout between floor tiles, use a suitable grout cleaner and a brush to remove the dirt and stains. Recently, the grout between the floor tiles in my house had become very dirty and dark. I tried regular mopping, but it did not remove the dirt properly. So, I hired professional cleaning services from NoBroker. I stayed there and observed each step carefully. I am sharing those steps with you so you can understand how to clean dirty floor tile grout.

How to Clean Dirty Grout in Floor Tiles?

1. First, they swept and vacuumed the floor to remove loose dust, hair and dirt from the tiles and grout lines. This made the grout easier to clean.

2. Next, they applied a suitable tile and grout cleaning solution to the dirty grout lines. They let the solution sit for a few minutes to loosen the dirt and stains.

3. After that, they used a small, stiff brush to scrub the grout lines. They moved the brush back and forth over the dirty areas and paid extra attention to darker grout lines.

4. Once the scrubbing was completed, they cleaned the floor with water to remove the loosened dirt and cleaning solution. They repeated the process on areas that were still dirty.

5. Finally, they dried the floor and checked the grout lines to make sure they were properly cleaned.

If your floor grout is heavily stained or hasn't been cleaned in a long time, you can try these steps. However, if the dirt is difficult to remove, hiring professional floor cleaning services can be a better option.

Hey so let me help you out with how to clean dirty tile grout. First things first, like start by sweeping and mopping using hot water. This will help loosen up the top layer of surface dirt and opens up the pores of the grout so your cleaning solution can sink in deeper.

​

Steps to Clean Dirty Floor Tile Grout

1. After sweeping and mopping with hot water, mix a paste of baking soda and hydrogen peroxide. Use a 2:1 ratio of baking soda to 3% hydrogen peroxide like the kind from the pharmacy and add a bit of dish soap to create a thick, oxygenated cleaner that lifts stains naturally.

2. Apply the paste and let it sit for at least 15 minutes. This wait time will let the peroxide break down mold and mildew while the baking soda dissolves grease.

3. Use a stiff bristled grout brush or an old toothbrush. Scrub in small circular motions rather than long strokes to ensure the bristles reach into the recessed dips of the grout lines.

4. Rinse thoroughly with clean water and a microfiber cloth. You might need to rinse twice to ensure no powdery baking soda residue is left behind, which can actually attract more dirt if left to dry.

5. Consider a steam cleaner for stubborn, set-in grime. The high heat of a steamer kills bacteria and melts away years of buildup without the need for harsh chemicals or heavy scrubbing.

I hope this will be helpful.

Get Your Floor Tiles Look Completely New by Team of NoBroker!