What do Plumbers Use to Unclog Pipes?

Plumbers use different tools to unclog pipes, depending on how serious the blockage is. They choose simple tools for small clogs and stronger tools for tough ones. Here is what do plumbers use to unclog pipes:

• Cup Plunger

  • Plumbers use a cup plunger for small clogs in sinks and bathtubs. The rubber cup sticks to the drain and creates suction. 

  • This suction pushes and pulls water to loosen the blockage. It works well on flat surfaces and is easy to use.

• Drain Snake

  • Plumbers use a drain snake to reach clogs deep inside pipes. This tool has a long, flexible wire. 

  • They push it into the drain and twist it to break or pull out the blockage. It works well for hair, soap, and grease.

• Drain Clog Remover Sticks

  • Plumbers use drain sticks to help keep pipes clean. These sticks slowly dissolve in water. 

  • They break down grease and bad smells. People use them often to prevent clogs from forming.

• Plumbing Air Blaster

  • Plumbers use an air blaster for clogs near the pipe opening. This tool pushes strong air into the drain. 

  • The air force moves the blockage forward, clearing the pipe quickly.

• Hydro Jetting

  • Plumbers use hydro jetting for very tough clogs. This method uses strong water pressure. 

  • The water removes grease, dirt, and debris from the pipe walls. It cleans the pipes fully and keeps them clear for a long time.

So, plumbers use many tools. They start with simple tools and move to more advanced ones if needed. I hope you found this helpful.

.

Hi there. Here is a list of what do plumbers use to unclog pipes. The main tools used include plungers, drain snakes, hydro-jet, drain auger and hair snake. I have discussed three of these in detail. You can understand their working process by reading below. 

What do Professional Plumbers Use to Unclog Drains?

Here are all the tools used by plumbers to unclog drains in a household.

• Plunger:

  The most widely used tool is a plunger. This is the basic tool which is put to work by a plumber. If this doesn’t work out, the plumber will move on to use heavier tools.

• Motorized Drain Snake:

  This tool is brought into use to treat bigger pipes or tougher clogs. These come in two variants: cordless and wired. The motor in the drain snake helps the clog to be pushed out and clear the pipe. A button is enough to push the cable and pull it back after the pipe is unclogged. 

• Manual Drain Snake:

  The manual version has the same working principle as the motorised drain snake. It consists of a long cable with a corkscrew-like shape at the end. A handle is fixed to the cable. The cable is pushed into the pipe through the drain opening. Next, the snake is manoeuvred around to get rid of the clog.

These are the three tools used by plumbers to get rid of clogged pipes. Hopefully, this will help.