How to Replace Sliding Window Locks?

Hey Rahul. In order to replace sliding glass door lock, you will have to first remove the old lock carefully and then place the new one. For replacing the lock, you will need a head screwdriver and screws; the rest is just technique. I am sharing the complete method you will have to follow below.

Window Slide Lock Replacement Method

1. Begin by finding the locking mechanism of the old lock. It is present on the side of the window frame where the handle is attached. 

2. Take a screwdriver and remove the screws that keep the lock handle in place. 

3. After you remove the screws, pull out the old handle from the locking mechanism carefully.

4. Next, insert the new handle into the locking mechanism, ensuring that it is properly aligned.

5. Take the screwdriver and tighten the scres that hold the new handle in position.

6. You must then test the new lock. Ensure that the new lock handle works smoothly and that it securely locks and unlocks the window.

7. Inspect the area around the new handle to ensure that no gas is present that could allow air or water to enter.

This is the complete process. I hope this will be useful to you.

Get Lock Replacement for Your Window Via Professional Carpenters of NoBroker!

When I realised my sliding glass door wasn’t locking properly, I knew it was time to take matters into my own hands. To replace sliding glass door lock, I researched for the easiest process and found it’s not as hard as it seems, especially after watching a YouTube video. All I needed was to identify the lock type, collect the tools, replace the old lock with a new one, and so on. I have shared the detailed process with you below.

Sliding Window Lock Replacement Process

With the right tools and some patience, I found I can replace my sliding window lock quickly and efficiently. Here’s what I found and how I handled it.

• First, I identified the lock type on my window. This step is important because there are different styles, and knowing what you need makes shopping easier.

• I gathered a screwdriver, the new lock, and some basic tools. If you’re unsure about the process, a manual or tutorial can be super helpful.

• Carefully unscrew the old lock, keeping track of the screws. This part was straightforward, but I ensured to avoid damaging the frame.

• After removing the old one, I aligned the new lock with the pre-drilled holes and secured it tightly. For those dealing with a latch mechanism, learning how to replace sliding window latch is also simple—just ensure it’s the right size for your frame.

• Once installed, I tested the new lock by sliding the window back and forth to confirm it worked smoothly.

Trust me, watching the process and doing it on your own is very different. It was such a tiring process. I hope you understand how to replace sliding window locks.

Also Read: 

The technique for sliding window lock replacement is quite simple. You will have to unscrew the screw which holds the lock in place and replace the lock with a new one. I am sharing detailed information about this with you. You will also find the method for changing the sliding door lock. So, continue reading to find out.

How to Do Sliding Window Latch Replacement?

Here is how you can easily replace your sliding door’s lock on your own.

1. I am showing you the process to replace a double-hung slider glass door lock. Window locks usually have a screw, which helps them to remain intact with the windows. Start by removing them to replace them with a new one.

2. So, take a screwdriver of an apt size. Unlock the window lock and find the screws which hold the lock against the window. Unscrew them one by one. 

3. After you unscrew the lock, take it out with care. Now, take the new lock and place it onto the window by matching the position of the screws.

4. Take a new set of screws and screw them into the lock to hold it into position.

That’s all, your lock has been replaced.

How to Replace Sliding Glass Door Lock?

Below, you will find the steps to replace the lock of your sliding door.

1. Take a screwdriver and unscrew the door handle. Then, remove the machinery that slides the door. 

2. Next, take a pen and slide it through the lower screw hole and pass it through the other hole. Keep it balanced between the two screw holes.

3. Take a plier and hold the sliding machine of the door. Remove the screw above the sliding machine, which holds it in place. With the plier, remove the machinery which you held.

4. Take the new machine and place it back in the panel. Hold it inside with the help of the screw above the panel.

5. Place the door handle by screwing the two screws at the top and bottom.

I would like to conclude here. I hope this helps you learn the sliding window lock replacement technique.

Hi Buddy,

In my house, sliding window locks are a necessity. It is crucial since I live with young children and pets. But I just realised my window lock needs to be replaced because it was broken. I have no experience with this. As a result, I enlisted the support of professionals from NoBroker home services to assist me with this repair work. Although I didn't perform the repairs myself, I watched them carefully. Consequently, I can answer your question regarding, “how to replace sliding window locks?”

This technique is particularly helpful for locking windows that are only slightly ajar, letting one enjoy the fresh air without worrying about children or pets exiting the house. Sliding window latches replacement is likely possible to replace the damaged sash latches. There are many different kinds of latches, but in the majority of cases, installing straightforward surface-mounted latches will allow you to restore the latching action.

How to replace a sliding window lock:

• Inspection

First, an inspection is necessary. Verify and make sure that nothing is obstructing the track along which the lock slides by inspecting the region, to detect anything that might obstruct the window from getting locked. Make sure that a tiny brush or a cloth is used to sweep the window track as well as to clean it.

• Making Window Track Repairs

The next step is to determine whether the issue is with the window lock or the track. Check the window track to see whether the lock is sliding. By way of illustration, if the window frame is not straight, bang it into shape with the aid of a hammer. If it doesn't work, be careful to completely replace the window frame.

• Change the Lock

Finally, when you inspect that the window lock is damaged. You can start unscrewing the lock with the aid of a screwdriver and replace it with a new one.

The sliding window lock can be changed in this manner. Any home improvement store will have the necessary equipment and supplies.

I would like to conclude here as I believe this answers your question of “how to replace sliding window locks?” I hope this helps:)

Read More: