icons

Login / Sign up

Zero Brokerage.

Thousands of new listings daily.

100 Cr+ Brokerage saved monthly.

Enter phone to continue

Change Phone
Get updates on WhatsApp

Experience The NoBrokerHood Difference!

Set up a demo for the entire community

Thank You For Submitting The Form
Q.

How to Clean HEPA Filters in AC?

view 35 Views

1

21 days

Comment

whatsapp [#222222128] Created with Sketch. Send
Summary
To clean a HEPA filter, first check if it is washable or non-washable. Switch off and unplug the AC before removing the filter. Washable filters should be gently rinsed with normal water and air-dried for 24 hours. Non-washable filters must be cleaned using a vacuum cleaner. Clean the filter every 2–3 months to maintain efficient cooling and healthy indoor air.
0 2026-02-17T17:34:02+00:00

The basic steps on how to clean HEPA filters are as follows,

  1. First, check whether the HEPA filter is washable or non-washable.

  2. Next, switch off the AC completely and unplug it from the power supply. This keeps you safe from electric shock while cleaning.

  3. Now, open the front panel of the AC slowly. Carefully remove the HEPA filter from the unit and clean it based on whether it is washable or non-washable. Do not shake it too much, as dust can spread into the air and cause breathing problems.

How to Clean Washable HEPA Filters in AC?

  1. Hold the filter over a dustbin. Tap it gently to remove loose dust and dirt. This helps reduce the amount of dust before washing.

  2. Take the filter under a tap and rinse it using a slow and gentle flow of normal water. Do not use hot water, soap, detergent, or any chemical. Wash the filter until the water runs clear and no dirt is left.

  3. After washing, keep the filter in a shaded place with good air circulation. Let it air dry naturally for at least 24 hours. Never place the filter in direct sunlight, and never use a hair dryer, heater, or fan to dry it.

How to Clean Washable Non Washable HEPA Filters in AC?

  1. Do not wash the filter with water. Attach a brush or hose pipe to a vacuum cleaner. Gently clean both sides of the filter to remove dust and dirt.

  2. Once the filter is fully dry or properly cleaned, place it back inside the AC correctly. Close the front panel carefully and plug in the AC.

Cleaning the HEPA filter in your air conditioner helps the AC work efficiently and gives you clean, healthy air at home. A clean filter improves airflow and cooling performance while reducing dust and allergens. You should clean the HEPA filter every 2 to 3 months for best results.

Get Your AC Filter Cleaned by Experts at NoBroker and Breathe Fresh Air

Flat 25% off on Home Painting
Top Quality Paints | Best Prices | Experienced Partners