Fresh air and fresh water helps you to live longer. An unhygienic environment will never let you recover from long term disease and may eventually become life-threatening. Apart from cleaning the outer surface of an aquaguard, you must also peep upon the interior part and make sure it is clean. But do you even know how to clean aquaguard filters at home easily? If not, let me give you some tips.How to clean aquaguard water purifierPeople often think how to clean filter of aquaguard at home easily but in the end approaches some cleaning service to do it for them. But you must know some tips so that you need not spend money on services always and can easily clean it up whenever needed. Here are some few steps to help you out:
At first disassemble all the parts of the aquaguard water purifier, especially the housing from the cartridges
Make a solution of dishwash detergent/liquid and water and wash the parts with it
Rinse all the parts thoroughly with the solution and scrub the areas where required
It is better to avoid using the solution while cleaning the cartridges. Simply wash them under running water
For ceramic cartridge, you can scrub it
Dry the parts with a cloth and assemble all of the parts together
Things that must be focused on to stop the aquaguard water purifier from getting dirty easilyYou need to focus upon a lot of things to make sure that the algae does not grow back quite often which are:
Warm environment helps algae to grow so do not place the aquaguard water purifier near the window where there is abundant sunlight
Since it is not always possible to call cleaners, it is better that you take a look at the interior parts and check whether it needs cleaning or not
Some filters fail to filter high contaminated water and thus gets dirty quite often. Contact the company from which you have brought the aquaguard water purifier if needed
I remember our first water purifier was Aquaguard. And I think my trust in Aquaguard water purifiers built up since I was a kid. That is why, when I grew up and set up my own home, I opted for Aquaguard. However, I was not aware of how to clean aquaguard filter at home. I wanted to make sure that my water purifier was working properly and that the water I was drinking was clean and safe. So, I asked my father for his help. Let me tell you what he told me.
How to clean water purifier filter at home?
To clean an Aquaguard filter at home, you can follow these steps:
The first thing that you need to do is turn off the water supply to your water purifier.
Disassemble the water purifier and remove the filter cartridges.
Soak the filter cartridges in a solution of mild dish soap and water for 30 minutes.
Scrub the filter cartridges with a soft brush to remove any dirt or debris.
Now rise the cartridges of your filter with water.
Air dry the filter cartridges completely.
Reassemble the water purifier and turn on the water supply.
You should clean your Aquaguard filter every 3-6 months, or more often if you live in an area with hard water or other contaminants.Here are some additional tips on how to service aquaguard water purifier at home:
Use a mild dish soap to clean the filter cartridges. Avoid using harsh chemicals or abrasive cleaners, as these could damage the filters.
Be careful not to overfill the sink when soaking the filter cartridges. The water should only cover the filters by about 1 inch.
Rinse the filter cartridges thoroughly after scrubbing them. Any remaining soap residue could contaminate the water.
Air dry the filter cartridges completely before reassembling the water purifier. Wet filters could harbor bacteria and other harmful microorganisms.
How To Clean Aquaguard Filter?
Saheli
✔In Progress
👁3326
Views
April 26, 2022
2022-04-26T19:51:20+00:00 2022-04-26T19:51:21+00:00Comment
2
Answers
Cleaning
Share