How Do You Fill Cracks in Hardwood Floors?

Hi Shakti. To understand how do you fill gaps in wood floors, you must first know that hardwood floors don’t allow the removal of a single board to fill glue in the crack and clamp it to fix the crack. You will require an epoxy filler for this. I did the same thing a while ago when my daughter observed a crack on the floor.

NoBroker Home Renovation Service

Get flooring and tile work done by experts at NoBroker Renovation service, offering durable and stylish solutions

End to End Renovation Solutions for Your Home

6-Months Service Warranty

Get Free Quote

How Do I Fill Gaps in My Hardwood Floor?

These are the steps you can follow:

1. First things first, carefully mask off the surface around the crack that you don’t want the epoxy to get onto. Put on protective gear like gloves.

2. Follow the steps given on the package and make up the epoxy, which requires mixing of two chemicals. 

3. You will have around 20 minutes of time once you mix the epoxy. Use the putty knife to work the filler into the crack with caution.

4. Make sure to get it level. You can opt to run a comb through it in the direction of the wood’s grain to give it some extra texture and simulate wood. This isn’t necessary, though.

5. After the epoxy cures, sand it down as required. But take care not to sand the wood to the sides. 

6. You can then take off the painter’s tape.

This is all about how do you fix gaps in hardwood floors. I hope it helps.

Get Long-Lasting Fixes for Cracked Flooring Via Renovation Experts of NoBroker!

Some related information:

How to Maintain hardwood floors?

When I noticed cracks in my wooden floor, I was not sure about how do you fill cracks in hardwood floors. This can be done via DIY steps but I was not that comfortable handling cracks in my flooring, so I opted for NoBroker's home renovation service. I’ll be happy to share the steps that they followed while tackling the job.

How To Fill Cracks In Hardwood Floors?

• Clean the Laminate Floor Surface: After using a vacuum to remove any loose dirt, the team used a mixture of dish soap and water to wipe the floor. They let the floor air dry entirely.

• Find Every Crack and Chip: After the floor was thoroughly cleaned, they looked closely to find every crack and chip, even the tiny ones. 

• Sand the Damaged Laminate Floor Area: After determining which portions of the laminate floor were cracked, they sanded the affected regions to improve the wood putty's adherence. To get rid of any last bits of filth, they used a damp sponge to wipe the sanded sections.

• Prepare the Putty for Application: They used wood putty that matched the floor's colour. Using a plastic scraper, they mixed the putty and applied it in small amounts, working in thin layers to ensure a smooth finish.

• Remove Excess Putty: After this, they removed excess putty before it dried using a plastic scraper and a damp cloth. 

• Allow the Putty to Dry Before Use: Even though the putty appeared dry within minutes, they allowed it to rest for several hours before walking on it, ensuring it was fully hardened and stable.

I hope this helps you understand how to fill gaps in hardwood floors.

The experts in renovations stated that selecting the appropriate filler is essential. Petroleum-based fillers provide a smooth texture, but water-based fillers can be adjusted with water. Making use of NoBroker's services was a wise choice. Their skill and focus on detail made sure my hardwood floors were fixed perfectly.

Read More: