How to replace window glass in wooden frame?

Replacing glass in window frame can be a little bit tricky especially if the window glass is broken. I faced the same issue when my window glass was broken during a thunderstorm. I had to remove the broken glass debris from the window frame very carefully. To Replace  Glass In Frame you need to have a few pieces of equipment handy with you. Let me share with you the equipment you will need to learn how to replace window glass in wooden frame.

• Pliers

• Heat gun

• Putty Knife

• Glass side

• Putty

• Paint

• Screwdriver

How to replace window glass in vinyl frame?

The guide I will share with you, will not only help you replace glass from the wooden windows, but also from other materials such as vinyl and aluminium as well. So, if you are wondering how to replace glass in a aluminum frame window you will get your solution by reading this answer. So, read on to know how to replace window glass in aluminum frame.

1. Take the pliers to remove the broken glass.

2. Warm the old putty by heating the area with a heat gun. Take a putty knife and scrape off the old putty.

3. To remove the putty from grazing points use the tip of the screwdriver.

4. Now you will see the rabbet groove. Clean it properly and remove dirt from it.

5. Apply putty on the rabbet groove.

6. Take the glass and fit it gently into the putty.

7. Place the new pane in the rabbets.

8. Use the flat side of the knife and fit the corners of each triangular glazing point into the wooden frame.

9. Smooth the putty by scraping away the excess.

10. Paint the area after the putty dries up.

This is an easy guide on how to replace window glass in wooden frame. I hope you like it.

Read more: