How to put wallpaper on concrete wall?

During my home renovation, I asked the engineer can wallpaper stick on cement wall. He said yes. Applying wallpaper to a cement wall is possible, but it requires the right wallpaper and adhesive as well as careful preparation. He also shared the process he will follow to put the wallpaper on the concrete wall, which I have mentioned below.

How can You Put Wallpaper on Concrete Walls?

1. Sand the wall smooth after cleaning it and using a concrete patch to fix imperfections. 

2. Following the manufacturer's recommendations, prime the wall and allow it to dry. 

3. For textured or uneven cement walls, you must install a wall liner. This is optional but recommended. 

4. Ensure the wallpaper you choose is appropriate for concrete walls. 

5. If necessary, apply the strong adhesive to the wall or the back of the wallpaper strips. 

6. Use a utility knife to trim excess wallpaper after hanging it.

7. Repeat Steps 3 to 6. 

8. Finally, check the manufacturer's guide and let the wallpaper dry for the suggested time.

This is all about how to put wallpaper on cement walls.

Hire NoBroker Renovation Team and Get Wallpaper Installed Smoothly on Your Concrete Wall.

There are various difficulties you must overcome before you can wallpaper concrete walls. These kinds of issues can be reduced or even eliminated with appropriate surface treatment. The secret to putting paper on concrete or cement walls is to level the surface and ensure that it remains dry. You will learn in detail how to put a wallpaper on concrete wall with this answer.

What is the process to put wallpaper on a concrete wall?

1) Clear cutouts

First, you will have to remove any significant cutouts from your concrete. You must try to remove any cutouts using a strong brush, chisel, or knife since they can interfere with your papering attempt.

2) Thoroughly clean the wall

Carefully clean the concrete to get ready for papering. If you don't, the adhesive glue may not adhere effectively. Clean the concrete with a mixture of ammonia and dishwashing liquid for a better effect. Simply mix a few drops of detergent with a cup of ammonia in a full container of water, then scrub the concrete wall with a sharp nylon brush. Dry the wall before continuing.

3) Apply a durable wall liner

Hang a thick wall liner over the concrete. Your wallpaper will be shielded from the concrete's surface by the liner. Apply a thick layer of adhesive glue on the liner's back after cutting it into strips to fit the size of your wall. Before moving on, give your liner about 24 hours to dry. This is one of the main steps in how to put wallpaper on concrete wall.

4) Pick your wallpaper properly

Choose a suitable wall covering and avoid using bright, solid colours for your wallpaper. Because even though the liner will help shield it from the concrete's texture, part of it may still show through. The application of patterned patterns, vinyl, and overprints over concrete blocks is ideal.

5) Take care when applying wallpaper strips

Vertically lay your wallpaper sheets over your liner. If the paper isn't pre-pasted, use your sticky glue to line the supports. Put your strips against the wall beginning at the top, measuring them carefully. Make sure your strips don't cross one another. Use a utility knife to cut the excess paper from the ceiling.

You are now aware of the process to put wallpaper on concrete wall.