How to Install a Window Air Conditioner Without Screws?

Here is how to install a window air conditioner without screws:

• First, place the no-drill support bracket in your window. Adjust it until it fits tight. 

• Then extend the legs outside and let them rest firmly against the wall. Tilt it slightly downward toward the outside so water can drain properly.

• Next, add some foam or weatherstripping where the bracket contacts the window. This helps protect the surface and keeps things steady.

• Now lift the AC unit and place it on the bracket. 

  • Make sure it sits evenly and doesn’t wobble. 

  • Once it looks good, slowly lower the window onto the unit so it holds it in place.

• After that, check for gaps around the sides and bottom. You will definitely see some. Fill those gaps with foam strips or any soft material you have on hand. 

• Push the foam in tight so air, dust, and bugs can’t get through. Don’t forget the corners and the bottom edge; seal those too.

• Then lock the window using the AC’s locking tabs so it can’t slide up. Turn the AC on and test it. Make sure it runs fine and feels stable.

• Finally, check outside to see where the water drains.

This type of window AC installation without screws should be done by a professional technician to avoid damage. If you try to do it yourself, you may damage the wall, window, or the AC unit. To avoid these problems, it is better to hire a professional who can install the AC safely and correctly.

Hey there! It’s generally advisable to use screws to attach the AC unit properly, otherwise it may fall down. But some manufacturers provide no-drill brackets, which can be used to mount your window AC easily. Our window AC installation was done by a technician and he used the support brackets to mount the AC securely. So, I’d be happy to share some steps I saw him follow on how to install a window air conditioner without screws.

How to Install a Window AC Without Screws?

The technician first prepared the installation area by cleaning the window frame and marking the central point of the AC and the windowsill. 

Here are a few steps you can take to install the AC without screws.

1. After marking the area, he used weatherstrips to seal around the window to seal all the gaps and prevent air from getting into the room.

2. He then attached the support brackets to the window frame using adhesive strips, which didn’t require drilling. 

3. Next, he placed the window unit onto the brackets and kept it centred and secured. 

4. To give stability, he adjusted the support brackets.

5. Finally, he connected the AC with the power cord that was provided with the unit.

That’s how we got the installation done, which was a quick process. If you’re doing it yourself, make sure you follow the instructions given by the manufacturer. Also, check if the window is behind the AC unit’s frame; otherwise, it won’t be secured properly and may fall.

Hope this gives you an idea on how to install window AC unit without screws.

Get Your Window AC Safely Mounted Via NoBroker Skilled AC Technicians!

Read more

What are AC Installation Charges?