icons

Login / Sign up

Zero Brokerage.

Thousands of new listings daily.

100 Cr+ Brokerage saved monthly.

Enter phone to continue

Change Phone
Get updates on WhatsApp

Experience The NoBrokerHood Difference!

Set up a demo for the entire community

Thank You For Submitting The Form
Q.

How to Clean LG Split AC Indoor Unit?

view 287 Views

1

44 days

Comment

whatsapp [#222222128] Created with Sketch. Send
Summary
To know how to clean LG Split AC indoor unit, turn off the power and open the front panel. Remove and wash filters with water, then dry completely. Gently clean coils, fins, and blower using a soft brush or cloth. Wipe the outer panel and check the drain pipe for clogs. Reinstall filters, close the panel, and run the AC in fan mode to dry and ensure proper functioning.
0 2026-04-16T09:40:27+00:00

Here is how to clean LG Split AC indoor unit effectively:

  1. You must first turn off the power and unplug the air conditioner before beginning any cleaning process to ensure safety. Never clean a running unit.

  2. Gently pull the front panel of your LG split air conditioner indoors until it locks in place.

  3. Carefully remove the air filters. These may be readily slid out and are typically found directly behind the front panel.

  4. Wash the filters with lukewarm water or use a gentle brush to clean them. You can use mild soap instead of harsh detergents. Let them thoroughly dry.

  5. Now, you can dust the evaporator coils with a gentle brush or dry cloth. You can use a commercially available no-rinse coil cleaner spray for more thorough cleaning.

  6. After that, to prevent bending the cooling fins, gently clean them with a fin comb or soft brush. This keeps the efficiency of the airflow intact.

  7. To get rid of dust and stains, use a microfibre cloth to wipe the panel and the outer side of the indoor unit.

  8. Inspect the drain pipe for clogs. If blocked, use a vacuum or carefully flush with water to avoid leaks.

  9. Now, use a small brush or blower to clean the internal blower. But do not dismantle any parts unless you are competent.

  10. Reinstall the dry filters correctly and close the front panel properly.

  11. Finally, turn the power back on and run the AC in fan mode for 10 to 15 minutes to confirm that everything is dry and working properly.

To minimise damage from excessive dirt, foul odours, or inadequate cooling, select professional service. Hope you found these steps easy and helpful.

Maximise Your LG Split AC Cooling Efficiency with NoBroker's Professional AC Service.

Flat 25% off on Home Painting
Top Quality Paints | Best Prices | Experienced Partners