Here is how to clean kitchen chimney with caustic soda:
First, remove the chimney filters from your kitchen chimney. Make sure you handle them carefully because they will be very oily and slippery.
Next, block your sink so the water does not drain out. Place the filters flat inside the sink or in a large container.
Now take about 500 grams of caustic soda and spread it evenly over the filters. Make sure you cover the greasy areas properly.
After that, heat the water until it starts boiling. Slowly pour the hot water over the filters. Stand back while doing this because the reaction will release strong fumes.
Avoid breathing in the vapors and keep your face away from the sink. Let the filters soak in this mixture for about two to three minutes.
During this time, the grease will start breaking down and come off the surface.
After soaking, carefully take out one filter. Use an old brush to scrub it gently and remove any remaining oil or dirt. You will notice that the grease comes off easily.
Repeat the same process for the other filter if needed.
Once you finish scrubbing, rinse the filters thoroughly with clean water. Make sure no chemical residue is left.
Finally, let the filters dry completely before placing them back in the chimney. Always wear gloves and a mask while doing this to stay safe.
I hope you know now how to clean chimney with caustic soda.
Clean Your Chimney Safely and Neatly by NoBroker Cleaning Experts at Low Cost.
Your Feedback Matters! How was this Answer?
Shifting, House?
✔
Lowest Price Quote✔
Safe Relocation✔
Professional Labour✔
Timely Pickup & Delivery
Intercity Shifting-Upto 25% Off
Check Prices
Intracity Shifting-Upto 25% Off
Check Prices
City Tempo-Upto 50% Off
Book Now
I have been cleaning my kitchen chimney with caustic soda. I follow these steps;
Carefully remove the chimney filters.
Pour hot water into a tub or bucket.
Put the filters in the heated water.
To the water, add a tiny bit of caustic soda.
Give the filters an hour or so to soak.
After soaking, put on gloves and remove the filters.
Use a brush to gently scrub them with soap or surf.
Before reattaching them to the chimney, give them a thorough rinse with clean water and allow them to dry completely.
Let NoBroker Professionals Deep-Clean Your Kitchen Chimney Safely & Affordably Now!
Your Feedback Matters! How was this Answer?
If you want to know, how to clean kitchen chimney with caustic soda, follow these steps;
Fill a plastic bucket with warm water, avoid hot water to prevent reactions.
Stir slowly as you gradually add the caustic soda to the water.
Keep the caustic soda to water ratio at 1:15 or adhere to the product's recommendations.
Use a non-metal stick to stir until dissolved.
After soaking the chimney brush, give the interior a thorough cleaning.
Give the mixture 15 to 30 minutes to work on the soot.
Use a different brush or sponge to rinse with clean water until all residue is gone.
Get Your Greasy Chimney Spotless with NoBroker Expert Chimney Cleaning Service Now!
How to Clean Kitchen Chimney with Caustic Soda?
Tina78
114 Views
3
6 months
2025-11-14T10:22:03+00:00 2025-11-14T10:22:40+00:00Comment
Share