What is Oil Bound Distemper Coverage Area?

Oil bound distemper coverage area is a certain wall area, depending on the surface condition and the method of application. In general, oil-bound distemper covers about 10 square metres per litre per coat on a smooth surface with average porosity. This means one litre of distemper can paint around 10 square metres of wall for one coat when the surface is even and properly prepared.

What is Oil-Bound Distemper Coverage Area?

The coverage can be higher. When the distemper is applied on a smooth and non-absorbent surface, it can cover about 17.66 to 20.45 square metres per litre per coat. This happens because the surface does not absorb much paint, so the distemper spreads more easily and covers a larger area.

However, the actual coverage area can change because several factors affect how the distemper spreads on the wall. The condition of the surface plays an important role. 

1. A rough, uneven, or highly porous wall absorbs more paint, so the distemper will cover a smaller area. In contrast, a smooth, well-prepared surface allows the paint to spread evenly and cover more area.

2. The method of application can also influence the coverage. Painters may apply oil-bound distemper using a brush, roller, or spray. Each method spreads the paint slightly differently, which can affect the final coverage.

In addition, the shade of the distemper may affect the amount of paint required. Some shades may require more paint to achieve a uniform, proper finish. I hope you know now the oil-bound distemper coverage area.

Paint Your House with Oil Bound Distemper by NoBroker Trusted Painters with Service Warranty.

Hey Puneet. Like Ms. Surbhi said, oil bound distemper coverage area can have a range between 180 sq. ft. to 295 sq. ft. per litre per coat. The amount of coverage you get from any distemper, not just oil-based one, is dependent on a lot of things, like the brand of the primer, surface quality, application technique, etc. I will tell you how you can maximise coverage.

How to get Maximum Coverage with Oil Bound Distemper?

1. Even out the surface. Apply the distemper on a smooth and even surface. A wall with cracks, holes and all will result in a reduced coverage area.

2. Sand the surface for a smooth finish. Doing proper prep before applying the distemper is crucial for achieving good coverage.

3. Apply thin and even coats. Professional painters know how to get the most out of the distemper paint and reduce wastage.

I hope this helps.

Get Maximum Coverage and Save Money on Your Painting Via NoBroker!

We got our home repainted last year, and we used oil bound distemper. I was not quite aware of the oil bound distemper coverage area and the benefits of using an OBD paint. Then I discussed it with my father, who told me that OBD is used for its good adhesion, breathability, and washability. He also said it provides excellent matt finish at a reasonable cost.

What is the Oil Bound Distemper Paint Coverage?

My father told me that oil bound distemper coverage is typically around 18-25 square metres per kilogram per coat. I also did some research on the benefits of using an oil bound distemper paint, which I am sharing below.

Easy to Apply

This paint is easy to apply, and it dries quickly, which means you can paint your walls within a short duration of time. 

Breathability

Oil bound distemper paint is a breathable paint, so there is no chance of moisture in the wall. This prevents the growth of mould and mildew on the surface. 

Cost-Effective

Oil bound distemper is relatively less expensive compared to other kinds of paints, making it an economical and budget friendly option for homeowners who want to paint their walls without spending a lot of money.

However, one major disadvantage of OBD that I found was, it requires more maintenance than other kinds of paint. It has a shorter lifespan and thus, may require repainting every few years to maintain its appearance.

I hope my answer gives you some idea about oil bound distemper. 

Read more

My best friend is an interior designer. While I was discussing my home interiors with her, she said I should get a fresh coat of paint for my walls. After much deliberation, I decided to go with Oil bound distemper. I wanted to know what is oil bound distemper coverage area to order the paint accordingly. She said that going by general rule of thumb, it could be anywhere between 180 sq ft to 295 sq ft/ litre per coat.

Since you have asked the same question, I feel obligated to share snippets from our conversation on this matter.

Where to use Oil Based Distemper?

Once we discussed the oil bound distemper coverage area, I got a detailed insight into the area to be covered with that paint. 

Basically oil based distemper is used for:

• Home Interior Plasters

• Brickwork 

• To decorate walls

• To decorate ceiling

Since so much coverage was required, I decided to get 10 litres of paint. Again the coverage can depend on the number of coats you want to apply on your house interiors. Keep that in mind.

Honestly, I think it’s a hassle to do all these calculations yourself and get supplies. It would be convenient if you just hire professional painters and let them do the job all together.

Read more: