How To Repair Wall Mounted Fan?

The wall-mounted fan in my study was not working, and I had to get it fixed asap as it gets hot in there. I looked online to find an electrician near my location and, after that, got in touch with one. I told him about the issue I was facing, and he said that he would visit and check it out. If you are trying to learn how to fix wall fan, then read the steps below. 

How to Fix Wall Fan Not Rotating?

He came and inspected the fan and informed me that there were some issues with the thermal fuse. He said adjusting it a bit would make the fan work. Here’s what he did. 

1. First, he disconnected the power to the fan and removed the control unit cover. 

2. Next, he traced the wiring and used a spare wire to connect points A to B to shunt the fuse.

3. After that, he connected the fan to the power and turned it on to check if it was working or not. Surprisingly, the fan started moving. 

4. Now, he disconnected the power and moved point C to B. 

Following this, he put the fan back together and connected it to the power source, and it was working again. That was how the electrician fixed my wall-mounted fan. 

Hire Professional Electricians through NoBroker to Get Your Fan Fixed at Low Cost

Read More

How to Repair Table Fan?

Hello Samhita. I would like to gie you a hand with how to fix wall fan. Recently, the wall mounted fan in our house temple stopped working. It wasn’t turning on and that caused us a lot of trouble staying inside the temple. So, I tried to look inside the fan and see what was wrong. The issue was with the capacitor which needed replacement. Let me show you how I did it.

Steps to Replace Capactor in a Wall Mounted Fan

Here are the steps:

1. Start by disconnecting the power supply to the fan.

2. De-solder or cut the wires at the terminals of the capacitor and connect them to a new capacitor of the same type.

3. Turn on the power to the fan. It should work now.

4. However, if te motor still refuses to rotate then it can be possible that the motor windings are the issue. That is a sign to replace the fan entirely.

This is all I know about how to fix wall fan. I recommend calling an expert such as an electrician for complex repairs. I hope it helps.

Get Your Fan Repaired Via Experienced Electrician of NoBroker!

Some related information

:

Why Ceiling Fan Stopped Working after Power Outage?

Two wall-mounted fans I had installed in my living room. But, suddenly it stopped rotating. Even after I oiled the shaft bearings, it did not turn. I therefore hired a NoBroker electrician to fix it. I also questioned him about DIY tips on how to fix wall fan. He advised me to examine the fan blades and motor, look for any loose wires, use a screwdriver to make the necessary repairs and test the ceiling fan. If you are facing the same issue, read on to get the detailed process.

How to Fix Wall Mounted Fan?

You can follow the below method that NoBroker electrician informed me to repair the wall mounted fan:

• Firstly make sure your ceiling fan's power source is off. To protect your safety throughout this repairing process, this is crucial.

• Now check for any obvious damage on the motor and fan blades.

• Replace any broken blades with new ones if you find them. 

• If any wires are loose or disconnected, properly reattach and tighten them as necessary.

• Finally, turn on the ceiling fan and test it to ensure it's working properly.

How to Repair Wall Fan Motor?

If you think that the motor in your fan is the issue, then perform the following actions:

• Take out the screws holding the cover of your fan in place. 

• Separate the fan blades and blade hub from your ceiling fan’s motor. 

• You can see the motor now. Look for any damaged or loose wires. 

• Replace any damaged parts as soon as you find them. 

• Test the fan after reassembling it to ensure the motor is operating properly.

Following the above procedures, you can easily fix your ceiling fan motor. If you are still facing issues with your fan, then it’s better to hire an electrician from the below link:

I hope you get an idea of how to fix wall fan.

Your wall/ ceiling fan is crucial for maintaining comfort in your house. A ceiling fan helps circulate conditioned air, increasing the effectiveness of your heating and cooling system regardless of the season. Even the expense of heating and cooling can be decreased. It's time to bring in a professional to assist you with the wall fan repairing process.

You will need to identify the issue if your ceiling fan shakes, emits noises, or just won't function properly. An electrician can assess the connections and parts of your fan to make a secure and dependable repair. If repairs are not feasible, they can assist you in quickly choosing and installing a replacement.

• Disassembling the Fan:

Remove the blade guard's hook or unscrew it, then unplug the fan. To remove the fan's blades or washer, turn them in an anticlockwise direction. Turn your fan over, then look at the rear for the screws.

• Lubricating the Bearings:

Turn the pin on the front of the fan with your hand to see if it rotates. 

Unscrew any washers or bolts blocking the base of the pin. Apply lubricating oil to the front and back of the pin. Any type of lubricating oil will work. You can buy lubricating oil at any auto parts shop or building supply store. Use enough oil to completely coat the pin. You don’t want to get any oil on the motor itself though. If you see it dripping off of the pin, tap it with the cloth to soak up the excess oil.

• Cleaning the Motor and Vent:

Look for dirt or dust on the back of your motor casing and clean it off. Your fan has probably not been operating properly if this vent is fully covered in dust or debris.

The vent can be thoroughly cleaned by soaking it in water and soap and letting it air dry.

• Reassemble your fan by putting the blades, bolts, and case back together:

Work in the reverse order of the fan's disassembly. Before putting the blade guard back over the pin, use a wrench to tighten the bolts and replace any washers. re-start your fan. Your motor is dying if the blades are spinning less quickly than the pin did when you checked it. Too little electricity is being used for it to fully turn the fan. Therefore, at this moment, you can also employ a professional to assist you with the same.

I’d like to conclude here about the process of wall fan repairing. I hope this helps:)

Read More: