icons

Login / Sign up

Zero Brokerage.

Thousands of new listings daily.

100 Cr+ Brokerage saved monthly.

Enter phone to continue

Change Phone
Get updates on WhatsApp

Experience The NoBrokerHood Difference!

Set up a demo for the entire community

Thank You For Submitting The Form
Q.

How to Repair a Cracked Toilet Base?

view 14 Views

1

27 days

Comment

whatsapp [#222222128] Created with Sketch. Send
Summary
To fix a broken toilet base, you must first determine whether the damage is structural or just a hairline crack. Turn off the water, empty the tank and bowl, clean and sand those areas with sandpaper, and then apply the combined epoxy. Smooth out the epoxy and let it dry as directed before turning back on the water to repair a hairline-cracked toilet base. However, to prevent leaks and any structural problems, deep cracks typically necessitate replacing the entire toilet.

For minor cracks only, repairing a damaged toilet base is usually a temporary solution. To prevent possible water damage and safety risks, the toilet should be replaced with a new one. Here is how to repair a cracked toilet base:

  1. At the shutoff valve located beneath the toilet tank, turn off the water supply to the toilet. Until the valve stops, turn it in a clockwise direction.

  2. Now, remove water from the tank and bowl by flushing the toilet. 

  3. Dry the porcelain with a wipe. 

  4. Thoroughly clean the area surrounding the crack. 

  5. To make the surface rougher, sand the area with sandpaper. 

  6. After that, give that area a thorough rinse and let it dry.

  7. As instructed by the manufacturer, combine the hardener and resin components of the epoxy.

  8. Use a spreader or putty knife to apply the combined epoxy to the crack right away.

  9. For optimal look, smooth and flatten the epoxy as much as you can.

  10. You must apply the epoxy within the material's working time, which is often no more than 30 minutes. 

  11. As advised by the manufacturer, let the epoxy set overnight.

  12. Turn the toilet's handle all the way counterclockwise to open the shutdown valve.

  13. Finally, allow the toilet tank to refill, then flush and look for leaks.

For cracks around the base of the toilet, such as those surrounding the bolts holding the toilet to the floor, epoxy works well. Epoxy can be used to patch cracks beneath the water line. But

please keep in mind that it won't be able to

provide a permanent solution if the crack is large. The only option in that situation is to replace the toilet. This is all about how to fix a cracked toilet base.

Hire NoBroker Expert Plumbers to Repair Your Cracked Toilet Bases at Low Cost.

Flat 25% off on Home Painting
Top Quality Paints | Best Prices | Experienced Partners