How To Paint OSB Board?

Painting a rough or uneven surface is tough and requires a special procedure. OSB boards are generally used as construction materials but painting them can bring out a fresh look. My cousins and I had worked on building a small wooden shelf last summer, so it was at that time, we attempted to paint an OSB. I can tell you how to paint OSB board but I’d suggest hiring a professional for a better job.

NoBroker Home Painting Service

Hire expert painters to give your home a fresh look with top quality paints.

Hire Professional Painters

1-Yr Service Warranty

Get Free Estimate

How to Paint Oriented Strand Board?

The most essential part of painting an OSB is preparing the surface for better adhesion. I had learned the steps from a few online videos, so I am sharing them below.

1. First of all, sand the flat surfaces of the OSB. This is tricky because you must leave the edges because they are already finished in a way that prevents the wood chips from coming away.

2. If you have visible gaps on the surface, then you must use a polyester resin-based filler to fill in the holes. You can do this using a putty knife to apply the filler where needed. 

3. Then, apply a heavy waterproofing primer to ensure that the surface is ready for the paint to stick properly.

4. Onto the final step, apply two coats of paint on the surface. Painting an OSB is a little more difficult than other surfaces because along with sanding and priming, you require a specific kind of paint. I had found that oil-based paint is considered as the best to paint an OSB. You can use a foam roller or brush and apply long and even strokes.

Thus, I hope these steps give you an idea on how do you paint OSB board. 

OSB stands for Oriented Strand Board. We have used these boards to craft our kitchen cabinets’ doors; hence, I am aware of several of their characteristics, particularly how to paint OSB board. It is quite easy. You will have to sand it well, apply primer, sand it again, apply the main paint and let it dry. Read the entire process next. 

How Do You Paint OSB Board?

Painting an OSB board is time-consuming so make sure you opt for this task during a holiday. Here are the steps on how to paint oriented strand board:

• Sand the Surface: Start by gently sanding the OSB board with medium-grit sandpaper to smooth out rough areas and improve paint adhesion.

• Apply Primer on the Board: Apply a high-quality primer evenly using a roller or brush. The primer will seal the OSB's porous surface and prevent the main paint from soaking in.

• Allow Primer to Dry: Let the primer dry completely before moving on to the next steps.

• Light Sanding: Once the primer is dry, lightly sand the board again to ensure a smooth surface for painting.

• Paint the OSB: Apply your chosen paint with a brush or roller. For even coverage, you should apply 2-3 coats.

• Dry and Seal: Allow each coat of paint to dry thoroughly. If needed, use a clear sealant for added protection and durability.

This is the entire painting OSB board process. You can paint it at home if you have the right items but if not, hire an experienced painter.

Read More: