How to Paint a Door Two Different Colors?

In my new home, the painting work is currently going on. Before starting, I discussed with my painter about doing something creative for the interiors. At that time, he suggested an idea, to paint a door in two different colours. He also explained to me in detail how to paint a door two different colors. I have shared the details with you so you can also get an idea of how it’s done.

How to Paint a Door Two Different Colours?

1. He said he would first check both sides of the door. The hallway side would be painted white, and the living room side would have the room’s colour. 

2. He mentioned that to figure out where to start and stop, he would close the door and see which part of the frame was visible from each room. 

3. Whatever is seen from the hallway stays white, and whatever is seen from the living room is painted in that colour.

4. He said the tricky part is the edge where both colours meet. Once the white paint is fully dry, he will use precision tape along that corner and then carefully paint the other colour up to the edge. 

5. Since the door is mostly open, he will keep the hinge side white so it blends with the hallway and looks neat when the door is open.

6. Finally, he said that after painting both sides, he will remove the tape and touch up any uneven edges so the frame looks clean and professional from both rooms.

This is how he did it. Seriously, it looked really good. I hope this helps you.

Get Expert Painters from NoBroker to Get Your Door Painting Done with Two Colours for Perfect Finish

Hi there. I am here to help you with how to paint a door two different colors. I got my living room’s door painted in two different colors last month, so I am aware of the steps to take.

How to Paint Door Two Different Colors?

Here is the process you can follow

• Begin with the frame. To understand the point where you must stop and start with the second paint, see where the door closes against the frame. 

• The slab strip is the point where it comes to painting your door frame in two separate colours. You can paint up till the outside edge of the slab with the external colour.

• Paint the opening edge using the internal colour and use the external one to paint the hinge edge.

• For the actual painting of the two doors, first clean the door with sugar soap mixed with warm water. The ratio of warm water and sugar soap should be 10:1. Scrub the surface and rinse off the solution. Let the door air dry.

• Paint the external side first, followed by the internal side. Before you do so, apply masking tape on the following surfaces:

1. Door’s hinge edge when painting the internal side.

2. The edge around the area of the door frame you are painting.

3. Door’s external side while painting the opening edge.

• When you paint the door frame, coat the area first, followed by a light feather of the paint. Don’t apply more or less paint. Follow the wood’s grain for wooden doors, painting upwards and downwards for vertical sides of the door frame and left to right for the top portion.

• Remove the masking tape before leaving the paint to dry for a couple of hours while painting a door two different colors.

• Move on to applying paint across the small panels. You can then paint the door frame as lightly as possible. 

• Next comes the door’s main surface around the panels. Follow the grain and paint across the bars.

• Let the first coat dry completely before you begin with the second coat in similar fashion as before.

This is all about how to paint a door two different colors. I hope this helps.