Here is how to make a bathroom cabinet with doors:
Cut Panels: Begin by cutting the panels for the cabinet. Cut the sides, top/bottom, fixed shelf, the back and the doors after measuring for each of the panels. Also, add 1 to 2 adjustable shelves.
Assemble: Drill pocket holes in top/bottom/shelf ends, glue and screw sides to top/bottom/shelf by using clamps. Attach it back with glue or nails.
Build Doors: Cut the stiles or rails if frames or use flat plywood. Make rabbet edges for panels if inset and then sand smooth with sandpaper or a sanding machine.
Install Hinges: Mark 2 to 3 spots per door and drill holes for Euro hinges. Attach to the doors and then the cabinet.
Finish: Sand with a 220 grit sandpaper, then apply waterproof sealer, add edge banding and then knobs.
Mount: Take French cleats or wall anchors to mount the cabinet.
One thing I would advise you is to use marine-grade plywood or PVC board for humidity or termites. Also, ventilate well after the installation is finished. This is all I have to share with you. I hope this will be helpful.
Have a Custom Cabinet Built for Your Bathroom with NoBroker's Carpenters!Your Feedback Matters! How was this Answer?
Shifting, House?
✔
Lowest Price Quote✔
Safe Relocation✔
Professional Labour✔
Timely Pickup & Delivery
Intercity Shifting-Upto 25% Off
Check Prices
Intracity Shifting-Upto 25% Off
Check Prices
City Tempo-Upto 50% Off
Book Now
How to make a Bathroom Cabinet with Doors?
arushii8
19 Views
1
20 days
2025-12-05T15:48:55+00:00 2025-12-17T16:25:05+00:00Comment
Share