Recently, I bought a water purifier for my home because the tap water in my area was not very good. When I purchased it, the shop owner told me they would send a professional to install it. The next day, the expert came to my home and installed the purifier. I watched the entire process carefully. For your reference, I shared a simple guide on water purifier how to install at home.
How to Fit Water Purifier in Home?
Here are the steps to install water purification.
The technician first checked the space under my sink to make sure the purifier and storage tank would fit.
He connected the purifier to the cold water line using a tee fitting above the shut-off valve.
Next, he installed the special faucet (spigot) on the sink, using the existing hole.
He attached the storage tank under the sink by screwing on the connectors properly.
Then, he mounted the filter unit on the wall under the sink, leaving enough space for maintenance.
After that, he connected the water supply tube, the drain pipe, and the tubing to the storage tank carefully.
Finally, he turned on the water, checked for leaks.
I hope this helps!
Install Your Water Purifier at Affordable Cost through NoBroker Now!
Read More:
Your Feedback Matters! How was this Answer?
Make Every Corner of Your Home Festive Ready !
✔
Trained & Experienced Partners✔
Best Prices✔
Quality Assurance
Home Painting
Get Free Estimate

Home Cleaning
Book Now

Home Renovation
Get Free Quote

Electrician Services
Book Now
After moving to my new rented house, I got a water purifier installed. I was tired of relying on bottled water. I wasn’t sure about the quality of your tap water. So, I hired an electrician from NoBroker and got a water purifier installed. Hence, I can tell you
how to fit water purifier in home. As I saw the electrician fit the purifier I realised that
assembling and installing a water purifier is more manageable than I thought.
How to Install RO Water Purifier at Home?
Just follow the steps I tell you and you can also install a water purifier in your home.
The first step is to choose a suitable location for the installation. I got my water purifier installed above my kitchen sink. You should make sure that you select a location with access to a cold water line and a drain.
Then you need to follow the manufacturer's instructions to connect the pre-filters, RO membrane, and post-filters. Always ensure all connections are tight and secure.
After this, drill a hole in your sink or countertop and install the faucet. I saw that my electrician attached the drain saddle to the drain line using the provided clamps and tightened them securely.
Then he used Teflon tape on the threaded ends of the water lines and connected them to the cold water line and the drain saddle.
After you do this, you will have to turn on the water supply and allow the system to flush for several minutes, discarding the first few liters of water. This removes any impurities or debris.
Now, just turn on the faucet and check for leaks. If everything is functioning correctly, you're ready to enjoy clean and refreshing water straight from your tap.
This is how to assemble water purifier at home. However, I would still suggest you hire an experienced electrician for safety reasons for this task.
Click to hire NoBroker’s experienced electricians. Read More: What is Pre Filter for Water Purifier: its Techniques?Your Feedback Matters! How was this Answer?
In western countries like in the US, the water there is so clean that people can drink it straight from the taps. The concept of water purifiers just does not exist. But here, in India, one cannot just drink water from the tap as the water is so contaminated that if one makes the mistake of drinking that kind of water, he will get a number of diseases. So for this, we have a concept of water purifiers and in today’s time, water purifier installation has become the utmost priority of each and every household in India. Let me guide you through the process with my step-by-step guide.
Water filter tap installation Proces
s
Take out all the parts and put together the RO pre-filter
Then, install the RO Membrane
Install the filter tap
Next, install the auto-cut-off system of the RO
Put together the filter compartment and tank
Attach the pipes and then turn the power.
Here you go, install the RO in 6 easy steps, However, installing water purifiers is not everyone’s cup of tea, so I would suggest you call an expert to do the job.
Need help with water purifier installation? Contact professional nowI hope my guide on
how to install a water purifier at home was helpful to you.
Read more: How to calculate water tank capacity in liters? How to increase water pressure from overhead tank?WATER FILTER TAP INSTALLATION
> First, the filter has to be chosen
> Then, break the connection of the water
> The adapter needs to be connected
> And then run the water.
You can now do the water filter tap installation on your own but we at NoBroker, advice you to consult a Plumbing Professional to assist you.
You can always surf
NoBroker Plumbing Service
for hassle-free services.
Hope you found the answer to your question.
Your Feedback Matters! How was this Answer?
Leave an answer
You must login or register to add a new answer .
How to Install Water Purifier at Home?
Arjun
75 Views
3
1 Year
2023-08-15T10:20:35+00:00 2023-12-08T13:21:38+00:00Comment
Share