How to Install Toilet Paper Holder?

Hello. After I moved into my new apartment for my job, I noticed that the bathroom didn’t have a toilet paper holder, and I needed one since I was used to using toilet paper. I knew that it was easy to install one on my own, but I still needed clear directions on how do you install a toilet paper holder. I found that the process is quite simple and uses only a few handy tools.

Get Free Estimate

How Install Toilet Paper Holder?

• I selected the ideal location and then assembled my supplies, which included wall anchors, a drill, a level, and a screwdriver. The recommended installation height, which I noted with a pencil, is around 26 inches from the floor.

• Started by looking behind the wall for any studs using a stud finder. I decided to use wall anchors to provide stability because I didn't hit a stud. I drilled holes for the anchors, making sure they were flush with the wall, as instructed.

• After this, I used the screws that came with the package to secure the toilet paper holder's mounting plate. I checked again with my level before fully tightening the screws because it was important to maintain an equal level throughout this phase. 

• Finally, I put the holder onto the mounting plate after it was firmly in place and tightened any set screws that were required. 

These are the steps on how to attach toilet paper holder. About 30 minutes were needed for the entire process, and I was happy with the outcome. In addition to improving functionality, this little addition gave my bathroom's decor a new touch. I would advise you to try these instructions out if you're thinking about doing something similar.

Read More:

Installing toilet paper holder is easy but you will need a set of tools like

• Toilet paper holder kit

• Drill machine

• Screwdriver

• Pencil

• Measuring tape

My husband installed the toilet paper holder in our bathroom himself and since I was his helping companion, let me share how do you install a toilet paper holder yourself. 

How to Install a Toilet Paper Roll Holder?

It is easy to install a toilet paper holder. Here are the steps you need to follow on how to install toilet paper holder:

• First, select the space where you want to install the toilet paper holder. It should be at a convenient and reachable height near the toilet.

• Use a pencil to mark the holder's mounting holes on the wall.

• Now use the drilling machine to drill pilot holes at the marked spots using an appropriate drill bit.

• If needed, insert wall anchors into the drilled holes for extra support.

• Align the holder with the drilled holes and secure it using the screws provided in the kit.

• If the holder has a separate arm, attach it securely to the main bracket.

• Make sure the holder is stable and can support the weight of the toilet paper roll.

• Place a toilet paper roll on the holder to confirm it rotates smoothly and the installation is done.

So these are the steps on how to attach toilet paper holder. It will take less than an hour and is a simple task so you can do it yourself. 

Read More: