How to Install Split AC in High Rise Building?

I recently bought an AC for my home and called a technician to install it in my high-rise building. When the team arrived, they agreed and started the installation process. First, they fixed the indoor unit and then worked on the outdoor unit. It was a long and detailed process, and I carefully observed how they did it. I have shared how to install split AC in high rise building, but honestly, only trained professionals can do so.

How Split AC Installation in High Rise Building?

1. Marke the wall for the indoor unit using a bracket and ensure it was level. 

2. Then drill holes, fix the bracket, and carefully hang the indoor unit, covering the floor to keep dust away.

3. Next, clean the balcony space for the outdoor unit. 

4. Place rubber pads under it and bolted it firmly so it will not move in the wind, which is very important in a high-rise building.

5. After that, connect the indoor and outdoor units with copper pipes, covering all joints with insulation. 

6. Carefully join the wires and ensure the main power is off for safety.

7. Use a vacuum pump to remove air and moisture from the pipes and spray soapy water to check for leaks, tightening any loose joints.

8. Finally, turn on the AC at 18°C to check that cold air was coming and ensure the drain pipe is working correctly. 

This is how the professionals install a split AC in a high-rise building. I hope this gives you a clear idea of how they do it.

Get NoBroker AC Service to Install Your AC Safely in High-Rise Building

My father told me to buy a split AC this summer, and I agreed. But then I started thinking about how to install AC outdoor unit installation in high rise building. So, I researched and found that the process includes installing the indoor unit, followed by setting up the outdoor unit. I have included the entire process below for your reference.

Steps for AC Installation High Rise Building

Here are the steps I came across to install the AC in a high-rise building.

1. Install the Indoor Unit: First, mark and drill holes using the mounting bracket as a template, ensure level, fix it with screws and hook the unit onto the bracket securely.

2. Set Up the Outdoor Unit: Then, clean the installation area, place anti-vibration pads, mount the unit on brackets, and bolt it firmly in place.

3. Connect Copper Pipes and Wires: After that, join indoor and outdoor units with insulated copper pipes, wrap joints with insulation tape, and connect wires using proper connectors as per the manual.

4. Test for Refrigerant Leaks: Then, use a vacuum pump for 15 to 20 minutes until 5 PSI is reached, then spray soapy water on joints to check for leaks and tighten if needed.

5. Power Up and Test: After all this process, switch on the AC to a cooling mode at 18 degrees Celsius, run for 15 minutes, and perform the Condensation Confirmation Check.

I hope you understand how to install split AC in high rise building.

Read More:

When I got my split AC installed for my 14th floor apartment, I hired a professional for the AC installation in high rise building. It is necessary that the installation is done by a qualified AC professional with the right equipment and safety harnesses, particularly in high-rise buildings. It should be ensured that prior to gas discharge, the refrigerant line is vacuumed and that all electrical connections and drainage are correct.

How to Carry Out the AC Installation High Rise Building?

Since many high-rises have rules against installing outside units on exterior walls, you should first get permission from your apartment society or builder. 

1. For safety and accessibility, the outdoor unit should ideally be placed on a designated balcony, service area, or AC ledge.

2. With at least 6 to 12 inches of space surrounding it, the indoor unit should be positioned on a wall out of direct sunlight. For effective cooling, make sure the indoor and outdoor units are as close together as possible, ideally, less than 15 metres. 

3. When mounting an outdoor unit at a height, make sure it is firmly fastened with high-quality brackets and anti vibration pads.

Let me tell you that the steps might sound simple but it requires safety, compliance, and professional help.

Get Your Split AC Installation Done at an Affordable Rate Via NoBroker AC Services Now!

Read More:

What are the AC installation charges?