How to Install Sliding Doors on a Cabinet?

Recently, I had decided to install sliding doors on my kitchen cabinets because I didn’t like the look of open cabinets and I needed a convenient door setting for them. This would also improve their storage capacity and keep things from falling constantly. So I started looking up how to install sliding doors on a cabinet, and found some clear steps to follow to transform my space.

Get Free Estimate

How to Add Sliding Doors to a Cabinet?

• To make the doors, I first measured the cabinet opening and cut two panels of 1/2-inch plywood. For a smooth sliding mechanism, I chose a bypass closet door hardware kit, which I found to be reasonably priced and simple to install. 

• To prevent the doors from rubbing on the frame, I secured a piece of 1/4-inch plywood to the top and bottom of the cabinet.

• After this, I used a combination square to make sure the track was level before mounting it with screws. For everything to go well, this step was essential. I pre-drilled holes for stability before attaching the rollers to the top of each door after securing the track.

• Finally, I checked the movement of the doors after they were hung and made any necessary little changes. Finished by adding basic finger pulls for convenience. 

This is all about how to install sliding cabinet doors. About three hours were spent on the process, and I was really happy with the outcome. I really suggest this project if you're thinking about it. It's a good way to add style and functionality to your house.

Read More:

I learned how to install sliding doors on a cabinet from the interior experts only. It is such a tough job and surely not for inexperienced people. In fact you will need a number of items for it like measuring tape, sandpaper, screws and more. 

How Do You Attach a Door to a Cabinet?

Here is a brief on how you can install sliding doors on a cabinet:

• Measure and Clean: Start by measuring the cabinet opening and give it a good clean. If the edges are rough, sand them down so the doors will slide smoothly.

• Pick and Cut the Doors: Choose your door material—wood, glass, or acrylic and then cut the doors a bit smaller than the opening so they can slide easily.

• Attach the Tracks: Install the sliding door tracks at the top and bottom of the cabinet opening and make sure they are on level. Do not forget to secure them with screws.

• Add Rollers or Gliders: Attach rollers or gliders to the top and bottom edges of the doors. Ensure they line up with the tracks.

• Fit and Test the Doors: Carefully place the doors into the tracks, starting with the top. Slide them back and forth to check for smooth movement. 

This is the entire process you will need to follow. But I will suggest you not proceed with the task unless you are a pro.

Read More: