Hi, you can install a crown molding ceiling by measuring the room, painting the mouldings and moving forward. I have shared the detailed process to help you out. You can learn the method by referring to the steps below.
NoBroker Home Interior Service
Get a smooth look with custom false ceilings and innovative lighting solutions via NoBroker's Design Services !
Get 25% OFF* on Home Interiors
Flat 10-year Warranty
How to Add Crown Molding to Ceiling?
Here is an easy process to install crown modelling.
To start with, measure your room by calculating the width of the four walls along the ceiling. This will help you determine the size of the mouldings to be purchased. You must look to buy a size which needs the least joints in the room.
Paint the moulding. Keep it to dry completely once you're done.
Now, you must nail the mouldings into the studs. Avoid nailing them directly into the drywall.
Choose a starting point and work your way around the perimeter of the room to place the crown moulding. A good idea is to choose a point which isn’t noticed as such, like the entrance door to the room.
When two pieces of moulding come in contact at an outside corner of the room, cut the pieces at an angle of 45 degrees at each meeting end. However, if the mouldings meet one another in an inside corner, cut one end at 45 degrees and the other in a square shape.
After this, cut the contoured edge of the moulding and remove the end-grain stock. Sand the cut till the time this contour fits with the adjacent moulding.
Then, nail the moulding against the wall by nailing the mouldings.
The last step is to work on touch-ups. Drill pilot holes for the nails near the ends. Then, fill the nail holes with a wood filler. Sand it and use caulk for the small gaps at corners in the room. Paint the nail holes and corners for touch-ups.
This is all regarding the process of adding crown moulding. Have a good day.
Decorate your house via NoBroker interior designer expert!
You must check: How Much Does a False Ceiling Cost: POP and Wooden?Your Feedback Matters! How was this Answer?
Get 25% OFF* on Home Interiors
✔
Personalised Designs✔
Transparent Pricing✔
Flat 10-Yr Warranty
False Ceiling and Lighting
Get Free Quote
Hall Interiors
Get Free Quote
Kitchen Interiors
Get Free Quote
Puja Room Interiors
Get Free Quote
Bedroom Interiors
Get Free Quote
Full Home Interiors
Get Free Quote
How to install crown molding by yourself:
- Measure the size of the room:
- Cut the crown molding:
- Clean up the Wood
- Locate and mark the wall studs
- Fit the crown molding in place
- Caulk Gaps
- Painting the Molding
How to install crown molding on kitchen cabinets with soffits:
The soffits must be either shorter or removed. Sometimes, plumbing or HVAC equipment in the soffit is immovable or not worth moving. A shorter cabinet can be ordered. The average height from floor to soffit is 84", thus some cabinets provide a 27" upper instead of a 30" upper. You can also order the cabinets with a 3" top rail for mounting a crown or a standard overlay, which will have a smaller crown and 1 1/2" of space. The cabinets shouldn't be mounted lower. There is a reason why the usual height is 18" from the counter to the bottom of the cabinet. After this, you can follow the above-mentioned steps that might help you with how to install crown molding on cabinets.How to install styrofoam crown molding:
- To determine the length of molding you need along your wall, measure it.
- To prevent it from sliding around while you cut the molding with a saw, clamp it to your work surface. You can get a precise cut and lower your risk of harm by securing the piece of crown molding. To avoid damaging the exquisite intricacies of your crown molding, do not grip too firmly.
- Hang the molding
- Clip on the corners and connectors
How To Install Crown Molding On Ceiling?
Tanmay
310 Views
2
2 Year
2022-07-29T15:26:14+00:00 2022-07-29T15:26:15+00:00Comment
Share