Here is how to install blue star window AC.
First, choose the right place. Pick a strong window or wall that can hold the weight of the AC. Make sure air can flow freely outside and inside. Do not install it near curtains or furniture that can block airflow.
Next, measure the window or wall opening. Use a measuring tape to check the width and height. Compare these measurements with the size of the AC unit. This step helps you avoid gaps or fitting problems. If you use a wall, mark the exact spot where you will place the AC.
After that, prepare the mounting area. Clean the window or wall surface properly. Fix the support bracket firmly as per the company instructions. Drill holes if needed and use strong screws and wall anchors. Use a level to keep the AC straight.
Now lift the Blue Star window AC carefully and place it on the bracket or in the window opening. Pull out the side panels to fill empty spaces. Tighten all screws so the unit stays firm and does not shake.
Then seal all gaps around the AC. Use foam strips or sealant to stop air leaks, dust, and rainwater. Lower the window glass tightly onto the AC if installed in a window.
Next, connect the power supply. Plug the AC into a separate socket to avoid overload. Check that the wiring is safe.
Finally, switch on the AC and test it. Check cooling, airflow, and water drainage. If you hear noise or feel vibration, adjust the position again.
I hope you understand the step-by-step process of installing an AC.
Install Your Blue Star Window AC by NoBroker Technician at Best Price
Your Feedback Matters! How was this Answer?
Shifting, House?
✔
Lowest Price Quote✔
Safe Relocation✔
Professional Labour✔
Timely Pickup & Delivery
Intercity Shifting-Upto 25% Off
Check Prices
Intracity Shifting-Upto 25% Off
Check Prices
City Tempo-Upto 50% Off
Book Now
How to Install Blue Star Window AC?
Dharun22
18 Views
1
20 days
2026-01-23T17:52:08+00:00 2026-01-23T18:37:03+00:00Comment
Share