How to Install a Prehung Interior Door?

I remember trying to install a prehung door in my house, which I wasn’t able to. So, I called a carpenter to install the door for me. The carpenter I hired started by removing the old door, followed by cleaning the opening and removing the protruding nails. He told me that when it comes to how to install a prehung interior door, this is very important as doing this ensures a smooth installation. 

Get Free Estimate

How Do You Install a Prehung Door?

After doing the steps mentioned above, he started measuring the dimensions of the opening. After that, he started installing the door. Here are the steps that he had followed.

• He started by positioning the door in the opening and lifted the door and slowly pushed it into the opening. He asked me to help him with this step. 

• Next, he checked if the door was properly aligned or not. For that, he opened the door to various positions and ensured it stayed there.

• After that, he installed the hinge screws in place and then installed the door knob. 

And that is how to install prehung door. This was smooth and didn't take much time. So, if you are planning to install a prehung door, then I would suggest that you hire professionals. 

To ensure that your door works properly you should install a prehung door in your house. So, what is a prehung door? A prehung door is a readymade door which comes with hinges attached to a three-sided frame. Installing a prehung door is an easy task if you have ideas about carpentry works. I will share with you a guide on how to install a prehung interior door with casing attached.

How to hang a prehung door?

To prehung finished interior doors, you will need:

• Hammer

• Circular saw

• Hand saw

• Tape measure

• Pencil

• Nail set

How to install a prehung interior door?

• Order the door 24 hours before installing. Don't lay it down on the floor. You can keep it vertically or horizontally.

• Thoroughly check and see if there are any damages to the door. Ensure that the door fits the frame.

• Now you need to prepare for the opening. For this, you need to ensure that the height and the width of the door must not be more than 0.5 inches.

• The opening of the door should be square in shape and you should ensure that the header and the floor must be level.

• You can trim the sides of the door if required. Leave a 0.5 inches gap at the bottom of the floor so that the door can move freely.

• Put the hinge side of the door by levelling the door accurately. 

• Level the door using shims and finish nails.

• Shim the top of the door as well.

• Shim the door frame back to square using a measuring tape. You need to see both diagonals of the door frame square.

• Now that your door is correctly positioned, shim some more nails and trim them with a handsaw.

This was all about

how to install a prehung interior door in a nutshell. I hope you find this informative.

Read more: