How to Install a Geyser?

Installing a geyser is a tedious process as far as I have learnt from my parents. So, when I decided to install a geyser in my bathroom, my father gave me clear instructions on

Get Free Estimate

how to install a geyser and also

to call an electrician and not do it myself. You do need professional assistance for safety. Most geyser manufacturers offer free installation services as well.

How to Install the Geyser?

1. Before calling a technician, measure the area where you want to install a geyser to ensure there's adequate space for its size and capacity. 

2. The geyser should be installed at least 1.8 metres above the floor to prevent accidental bumps.

3. During installation, pay attention to electrical safety. The power switch should be positioned away from wet areas, and the geyser should be connected to an MCB to protect against overloads and fluctuations. For gas geysers, keep the gas cylinder distanced from the unit.

4. Ensure there are no obstructions in the water connection pipes for optimal flow. Use high-quality pipes, preferably steel, as recommended by the manufacturer. If you experience low water pressure, consult your technician about the need for a pressure pump.

By following these guidelines on how install geyser, you can ensure a safe and efficient setup for your home. 

Read More

How to Use Geyser in Bathroom?

I recently purchased a new geyser for my bathroom, but I was unsure how to set it up on my own. I thus sought advice from a buddy who installed a geyser. He told me that a geyser installation is a simple procedure but a slight mistake can result in serious safety issues as well as damage to the geyser. Scroll down to get tips on how to install a geyser easily.

How to install gas geyser at home?

Before installing a new geyser, you must

gather the required equipment and supplies, such as a geyser unit, pipes, valves, electrical cabling, and so on. Now follow the instructions given below:

1. 1. Maintain space between geyser and walls:

      Find a good position for your geyser unit before starting the installation. Keep a distance between the geyser and the walls so that technicians may inspect it easily whenever needed and for ventilation.

   2. Geyser installation must be done at a certain height:

      For a good water flow to a tap or shower, a geyser should be placed at a height of six feet.

   3. Be extra careful with power supply:

      Instead of power boards like those used for TVs and mobile charging, electric geysers need power connection. For security and automatic short circuit protection, use a miniature circuit breaker (MCB).

   4. Make use of metal pipers:

      Plastic pipes should not be connected to your geyser in order to avoid damage and additional expenses. Metal pipes are economical and have a long lifespan.

Homeowners who have a fundamental understanding of plumbing and electrical work can complete the task of

new geyser installation easily

. Hope this answer is helpful to you.