icons

Login / Sign up

Zero Brokerage.

Thousands of new listings daily.

100 Cr+ Brokerage saved monthly.

Enter phone to continue

Change Phone
Get updates on WhatsApp

Experience The NoBrokerHood Difference!

Set up a demo for the entire community

Thank You For Submitting The Form
Q.

How to Install a Ceiling Fan Regulator?

view 5 Views

2

0 days

Comment

whatsapp [#222222128] Created with Sketch. Send
Summary
To install a ceiling fan regulator, first switch off the power at the breaker and confirm there is no current. Remove the switch plate and old regulator if present. Connect the new regulator in series with the live wire. Secure the connections, refit the plate, restore power, and test the fan speed.
0 2026-02-19T07:04:12+00:00
To install a ceiling fan regulator, turn off the electricity, remove the old regulator or switch plate, connect the phase (live) wire to the regulator terminals, and reinstall the plate. Before I tell you how to install ceiling fan speed regulator step by step, you must keep the following tools ready:
  • Screwdriver (tester type preferred)

  • Voltage tester

  • Insulation tape

  • New fan regulator from brands like Havells or Anchor

How to Install Ceiling Fan Regulator?

  • Switch off the MCB on the distribution board. Use a tester to confirm that there is no current. 

  • Now, unscrew the panel gently and take it out slightly to check the cables. 

  • After that, connect the regulator in series with the phase (live) wire that leads to the fan. Like:

    • One terminal (live wire) to the incoming phase

    • Second terminal to the outgoing wire to the fan

  • You must tighten the wires properly in the terminals, insert the regulator into the switch box, and screw the plate back on. 

  • Finally, turn on the MCB and rotate the regulator to verify smooth fan speed control.

Also, if you’re unsure about wire identification, hiring a qualified electrician is the safest option.

Get Your Ceiling Fan Regulator Installed by NoBroker Electrician at Low Cost.
1 2026-02-18T09:16:30+00:00

Here is how to install a ceiling fan regulator:

  1. Turn the electricity off at the circuit breaker. 

  2. Now, you must remove the old regulator if necessary. 

  3. After that, connect the new regulator using the wiring schematic provided in the manual. 

  4. Reinstall the regulator in the switchboard and replace the cover plate. 

  5. Finally, restore power and test the functionality of your ceiling fan’s regulator.

If the wiring is uncertain, contact an electrician. Faulty connections might damage the fan or give a shock.

What is the Ceiling Fan Regulator Price?

The pricing of ceiling fans regulator varies depending on the type of regulator you purchase. Like:

  1. On average, an Old Type Regulator will cost between Rs. 100 and Rs. 300.

  2. If you purchase an Electronic Regulator, it will cost from Rs. 300 to Rs. 800.

  3. The cost of the ceiling fan Smart Regulator ranges from Rs. 800 to Rs. 2500.

Hope you found this information useful.

Hire NoBroker Trusted Electrician for Ceiling Fan Regulator Connection at Low Cost.

Flat 25% off on Home Painting
Top Quality Paints | Best Prices | Experienced Partners