How to hide TV wires over brick fireplace?

I bought a house in Pune and am planning some interior work. When I considered mounting a TV over the brick fireplace, I was unsure how to hide wires on brick fireplace mounted TV. So, I researched it and found helpful tips like bundling the cords with cable ties spaced every 6 inches. I also added other ideas I came across to get a better understanding of hiding TV wires over a brick fireplace.

How to Mount TV on Brick Fireplace and Hide Wire?

Here are some ideas to hide wires I found during my research.

1. One idea suggested creating a fabric cover, measuring the cords, finishing the fabric edges, and attaching sticky-back Velcro so it wraps neatly around the cables.

2. Another method is to install decorative trim. Cord clips help keep them in place, and painting the trim the same color as the wall helps it blend in.

3. If the fireplace is made of solid brick and doesn’t have a mantel, one option is to make a shallow groove between the bricks, hide the cables inside it, and then fill it back in to keep everything out of sight.

4. I also read about using an HDMI balun to send the video signal over Ethernet cables, which can significantly reduce visible wires.

These are the steps I found, but I am planning to get some professional designer insights on it before installing it. If you want, you can

. I hope this helps you.

Get Your TV Installed at Low Cost through NoBroker's Electrical Services.

Read More:

Can You Mount a TV Without Drilling?

If you want to prioritise a hot sweat after your entertainment, position your television above the fireplace. Some people opt not to install a television over their brick fireplace because they are unsure of what to do with the irritating wires. So let me guide you on how to hide TV wires over brick fireplace.

How to hide wires for wall mounted TV over fireplace?

• Mark the TV's location on the brick fireplace first. For this, use marking tape. Keep the viewing angle in mind when marking.

• The majority of fireplaces have a side access panel. This panel is employed in repairs. Create a hole in the side panel using a hole saw. This opening can be used to insert the power plug.

• Keep in mind: You'll need to use a hole saw that is appropriate for the size of the power connector. This is one of the main methods in how to hide cords on wall mounted TV above fireplace.

• Enter the fireplace and remove the side panel next.

• You must now locate the exact placement of the hole on the brick fireplace. Keep the header in mind when you select a position for the hole. Pick a spot that is directly above the header.

• You should remove bricks using the hammer and chisel and make the hole with the drill.

• You will want a power plug with male and female connectors for this procedure.

• Install the female connector in the brick fireplace after taking it out.

• Return inside the brick fireplace now, and construct a route to cover the TV cable and wire. Rodents won't get to the wires if you run them through a tube.

• You should run the TV wires through the tube and instal the male connector on the side access panel. Don't forget to remove the other cables.

• Check the brick fireplace wall one last time and make any necessary brickwork repairs.

• The flat-screen TV will now be mounted on the fireplace. After that, you can attach the extension cord to the brick wall's female connector.

• This helps you understand how to hide TV wires in wall above fireplace.

You are now aware of how to hide TV wires over brick fireplace.