A few weeks back, while cleaning my bathroom, I noticed that the grout line along the right side of my shower wall had degraded. Because of that, dirt and residue were getting deposited there. I decided to re-grout the area on my own and started looking up how to grout shower corners. I learned that the first step is to gather the materials necessary for the job, such as a caulking gun, sanded caulk, etc.
How to Grout Corner of Shower?
After you are done gathering all the materials, you can follow the below steps.
Start by cleaning the area of all the residue. You can use a damp cloth to wipe the area and dry it completely.
Next, use a utility knife to cut the tip of the caulk tube. Ensure that it's at a 45-degree angle.
Insert the caulk in the caulk gun and secure it properly.
Position the caulk gun at a 45-degree angle and slowly pull the trigger to apply it steadily and evenly.
Use a rag to smooth out the caulk.
After that, you can use a damp caulk to remove the excess caulk.
Finally, let the caulk dry for around 24 hours before you start using the area. I hope this helps.
Hire Expert Plumbers through NoBroker to Grout Your Shower Area at Affordable Rates
Read More
Your Feedback Matters! How was this Answer?
Make Every Corner of Your Home Festive Ready !
✔
Trained & Experienced Partners✔
Best Prices✔
Quality Assurance
Home Painting
Get Free Estimate
Home Cleaning
Book Now
Home Renovation
Get Free Quote
Electrician Services
Book Now
I recently had to do the task to get the corners of my shower regrouted. It is because I found some of the grout had fallen out where walls meet the floor. I was frustrated but eager to find an easy solution. So I researched how to grout shower corners. I found that shower corners can get easily grouted with silicone caulk. It turned out to be a learning experience.
How to Grout Corner of Shower?
I understood that grout is always going to fall and below is the process I came across to fix the corners in shower:
Instead of regular grout, I learned that the right way to handle the corners is to use silicone caulk.
I found that the walls and floor in a shower tend to expand and contract with temperature changes, and regular grout just cracks under the stress.
So, first I need to clean out the corners of the shower.
After that, I have to pick up 100% silicone caulk specifically for bathrooms. It’s antifungal, which means it’ll help prevent mold.
Then, I need to fill the gaps with caulk.
It was mentioned to keep a steady hand and smooth the caulk with a wet finger or a caulk smoothing tool right. This ensured a clean finish and a good seal.
Finally, I needed to wipe down the area with rubbing alcohol to make sure there was no soap scum or residue left.
After looking at this process, I found that it will take a bit of patience, hence to save my time, I hired an expert from NoBroker. Now my shower corners are sealed, flexible, and look neat. I hope it helps you understand how to grout corners in tile shower.
Fix the Corners of Your Shower at Affordable Rate with NoBroker Plumbing Service.Read more:
How to Apply Grout Sealer?
How to Grout Shower Corners?
shravani8
76 Views
2
9 months
2024-09-19T19:48:14+00:00 2024-10-01T10:50:42+00:00Comment
Share