How to get more water pressure in house?

A few weeks back, my aunt came to visit me, and after using the shower, she told me that the water pressure seemed kind of low. She suggested I get it checked by a plumber. I called a plumber and asked him to inspect the water pressure. After inspecting, he told me that the water pressure was indeed low. Following this, I asked him how to increase water pressure in home. 

Get Free Estimate

How to Increase Water Pressure in House?

He said there are two main reasons water pressure is low. He told me about them and also how to fix it.

1. Leaks: Leaks are one of the most common reasons a drop in water pressure occurs. He said fixing that would instantly resolve the pressure issue.

2. Clogs: According to him, over time, mineral deposits in hard water can slowly build up and reduce water pressure. This kind is hard to fix, as cleaning every pipe is time-consuming and expensive. This issue can be resolved by increasing the water pressure by adjusting the pressure valve, which can be found near the water meter.

In my case, I was facing a pipe leakage at the back of the house. He then fixed the issue. I hope this helps.

Avail NoBroker Plumbing Service to Get Your Pipe Leaks Resolved by Experts

Read More

How Much Does it Cost to Fix a Leaking Pipe?

Have trouble waiting for the water to collect in your water tank like me? Don’t worry, I have some effective solutions to overcome these problems. Because I know we don’t want to wait that long to let the water tank get filled with such a low pressure. So let me share with you how to get more water pressure in house.

How to fix low water pressure in old house?

1) Pressure-reducing valve adjustment

Let's say you've discovered that the water pressure in your home is low. If so, your first way to proceed should be to boost it by changing the pressure-reducing valve on the primary water line in your house. You must first determine whether your house has a pressure-relieving valve. Test the water pressure in your system. You need to adjust the nut to keep the valve in its new place once the pressure reaches 50 PSI.

2) Contact the municipality

Consider a scenario in which changing your pressure-reducing valve didn't cause a boost in water pressure. If so, there may be a problem with your city's water system that is causing your low water pressure. Contact the municipality to ask if there are any issues with the water main close to your house. If a risk is identified, it will be fixed, and your water pressure issue will also be resolved.

3) Verify for leaks

Water has a tougher time passing through faulty pipelines. Checking for leaks is the simplest approach to determine whether broken plumbing is hurting your water flow. You need to check any observable pipelines for wetness and indications of rust or corrosion. This is one of the main methods in how to adjust water pressure in house.

4) Place a pressure booster

You'll have to set up a pressure booster if you've tried the previous solutions and your water pressure problem is still there. Before water comes into your home, a pressure booster uses an electric pump to raise the pressure flowing from the central route to the proper amount.

I hope you understood how to get more water pressure in house.