How to fix fan in false ceiling?

A month ago, we got a false ceiling done in our living room. But later we realized that we can't feel the air. So, we planned to install a ceiling fan on the false ceiling. As I was unsure of the fan installation in false ceiling steps, I hired an electrician. He informed us that, as false ceilings cannot directly support the weight of a ceiling fan, installing it requires particular caution. I have observed the process he followed and hence, shared the same below.

Get Free Estimate

How to Fix Ceiling Fan on False Ceiling?

1. Find the main ceiling and secure the fan hook there. 

2. Now, if required, use a hammer drill to drill into the concrete beam. 

3. Use an anchor fastener to insert a fan hook bolt. 

4. Securely tighten it to support at least twice the fan's weight. 

5. At the location of the fan, make a clean cut in the false ceiling. 

6. To fill the space, place a metal plate above the false ceiling level. 

7. Using a clamp and rubber bush, tighten the downrod of the fan to the hook. 

8. Pull the fan's wiring from the ceiling and through the downrod hole.

9. Connect the fan terminal block to the earth, neutral, and live wires. 

10. For insulation, use electrical tape. 

11. Now, to conceal the wire gap, tighten the canopy covers. 

12. Finally, turn on the electricity and run tests on the fan at various speeds.

I hope you found the steps helpful.

Hire NoBroker Trusted Electrician to Fix Fan in False Ceiling at Affordable Rate.

Opting for a fan fitting in the false ceiling is not that easy. We hired an electrician to fit a fan in our living room false ceiling so here is a brief of the process that he followed: The electrician first found a strong support above the false ceiling to hold the fan’s weight. Then, he drilled a hole, fixed a metal hook securely, and mounted the fan. Finally, he connected the wiring, tested the fan, and ensured it was running smoothly.

What is the Process for False Ceiling Fan Fitting?

Installing a fan in a false ceiling is not that easy. You will need to make sure that the ceiling can withstand the weight of the fan and also that it is fitted correctly. Here is how to install fan in false ceiling: 

1. Install Support: Fix a strong metal hook or frame to the main ceiling above the false ceiling to hold the fan’s weight.

2. Mount the Fan: Cut a hole in the false ceiling, attach the fan securely to the support using a rod or bolts.

3. Wiring and Testing: Connect the wires to the power supply, secure all connections, and test the fan.

So this the entire process of installing a fan in the false ceiling. 

Securely Mount Fans In False Ceilings with the Help of NoBroker’s Trusted Electricians

Read More:

How much for Electrician to Install Ceiling Fan?

Fixing a ceiling fan can be tricky especially when it comes to a false ceiling. You need to have an idea about the job before hand. If you don’t I would recommend you to call an electrician. It won’t cost much so you don’t have to worry about that as well. But since you are here asking how to fix fan in false ceiling, then let me help you out. 

Get Free Estimate

How to fix a ceiling fan in false ceiling?

You must choose where to install your ceiling fan. Next, you must take a few tiles from the drop ceiling. It's crucial to provide yourself full access to the joists above your false ceiling. Check to see whether the power is off. The electrical wire from the power source might be routed along the joist. You should use cable staples to fasten the cable. The heavy-duty fan box must then be mounted to the ceiling.

Attaching some more support brackets to the rear of the false ceilings is an additional step that needs to be completed. These brackets are crucial for supporting the ceiling fan and holding it in place. The bracket needs to be strong. It must fit inside the artificial ceiling grid construction. The most crucial step in mounting a fan on a fake ceiling is identifying the strongest base and bracket. The fan's vibrations when it is operating have to be controlled by the base. The bracket is typically used to provide proper support and equally distribute the fan's weight after installation.

Checking all security points is the last thing you need to do. Make sure to tighten any and all points, whether they be base points or additional points. This step is crucial to maintaining the fan's stability on the drop ceiling. People frequently overlook the need to tighten all joints and points.

This is all from my end about how to fix fan in false ceiling.