icons

Login / Sign up

Zero Brokerage.

Thousands of new listings daily.

100 Cr+ Brokerage saved monthly.

Enter phone to continue

Change Phone
Get updates on WhatsApp

Experience The NoBrokerHood Difference!

Set up a demo for the entire community

Thank You For Submitting The Form
Q.

How to Fix a Split in Wood Furniture?

view 13 Views

1

23 days

Comment

whatsapp [#222222128] Created with Sketch. Send
Summary
To know how to repair split wood furniture, assess the split, clean the crack, and then apply wood glue for tiny gaps or epoxy or wood filler for bigger ones. Wipe off any excess glue and let it dry. Fill any remaining gaps with matching wood filler, then apply clamps with sufficient pressure for 24 hours to create a solid connection. Finally, sand and refinish those areas smoothly.
0 2025-12-30T07:30:11+00:00
Here is how to fix a split in wood furniture:
  • Assess the split.

Begin by examining the split. If the crack or split is minor and the wood has not fully separated, a simple glue repair may be sufficient. For deeper splits, use epoxy or a high-quality wood filler.

  • Clean the cracked area.

Using a dry cloth, clean the crack of any dust and dirt. You can also use acetone on oily wood.

  • Apply epoxy or wood glue.

For minor cracks, you can just apply a small amount of wood glue to the cracked area and uniformly distribute it with a tiny brush. It ensures that the glue penetrates the damaged wooden furniture completely.

For deeper splits, follow these steps:

  • Use the precise ratio specified on the packaging to combine the resin and hardener.

  • Next, use a plastic applicator or syringe to inject the epoxy deeply into the crack.

  • To prevent the epoxy from seeping through, you can seal the crack with tape or put a plastic sheet underneath. 

  • If any adhesive leaks out, carefully wipe it away with a fresh cotton cloth.

Note:

When brushing or injecting the adhesive, go slowly and steadily.

  • Clamp the wood tightly.

The fourth step in how to repair split wood furniture is to apply clamps with sufficient force that can cause some glue to squeeze out. Keep stressed joints clamped for a full day, although you must clamp for at least an hour.

  • Let it dry.

You only have to wait. Most glues and epoxies require 12 to 24 hours to fully dry, depending on the type.

  • Sand your furniture.

To level out extra glue or filler, use sandpaper with a grit size of 80 to 120. Then, use 180 to 220 fine-grit sandpaper to smooth it out and make it blend in with the surrounding wood.

  • Finally, refinish the wooden furniture.

Apply a matching stain, polish, or paint to the surface to complete the repair. If necessary, apply a protective finish. Hope you found these steps helpful.

Hire NoBroker Carpenter to Repair Your Wooden Furniture at Affordable Rate.
Flat 25% off on Home Painting
Top Quality Paints | Best Prices | Experienced Partners