The steps to do split AC servicing are;
First, switch off the AC and turn off the main power supply from the MCB or breaker. This step is very important because it protects you from electric shock. Never start servicing while the power is on.
Next, open the front panel of the indoor unit. Gently unhook the top side and unscrew the bottom if needed.
After opening the panel, pull out the air filters slowly. These filters collect dust and block airflow, so cleaning them improves cooling.
Wash the filters using clean water. If the filters are very dirty, use warm water and a little mild soap. Do not use strong chemicals.
After washing, keep the filters in a shaded area and let them dry completely. Never install wet filters back into the AC.
Now, clean the evaporator fins and cooling coil. Use a soft brush to remove dust carefully. Do not bend the fins.
You can spray a coil cleaner or use a mild detergent mixed with water. Rinse gently so water does not spill on electrical parts.
After that, check the drain tray and drain pipe. Dirt and algae can block the drain and cause water leakage.
Pour clean water into the drain and make sure it flows out smoothly. Clear any blockage if you notice slow drainage.
Reassemble the AC. Place the dry filters back in position and close the front panel properly. Tighten all screws and make sure everything fits well.
Finally, turn on the main power and run the AC. Regular servicing keeps your split AC clean, improves cooling, and reduces electricity bills.
I hope now you know how to service indoor unit of split AC.
Hire NoBroker AC Technician to Service Your Split AC at Affordable Prices Now!Your Feedback Matters! How was this Answer?
Shifting, House?
✔
Lowest Price Quote✔
Safe Relocation✔
Professional Labour✔
Timely Pickup & Delivery
Intercity Shifting-Upto 25% Off
Check Prices
Intracity Shifting-Upto 25% Off
Check Prices
City Tempo-Upto 50% Off
Book Now
How to Do Service of Split AC?
To service an LG split AC, first switch off and unplug the unit for safety. Dry the indoor coil using fan mode, then open the front panel and remove the filters for cleaning. Gently clean the evaporator coil, drain tray, and pipe to prevent dust and odor. Reassemble all parts carefully and test the AC. Regular servicing improves cooling, air quality, and extends the AC’s lifespan.
Nanthu88
21 Views
1
21 days
2025-12-29T18:54:08+00:00 2025-12-31T11:47:23+00:00Comment
Share