icons

Login / Sign up

Zero Brokerage.

Thousands of new listings daily.

100 Cr+ Brokerage saved monthly.

Enter phone to continue

Change Phone
Get updates on WhatsApp

Experience The NoBrokerHood Difference!

Set up a demo for the entire community

Thank You For Submitting The Form
Q.

How to Check Smart Installation in Samsung AC?

view 11 Views

1

4 days

Comment

whatsapp [#222222128] Created with Sketch. Send
Summary
Samsung Smart Install on 2025 inverter ACs is a mandatory self-check. Ensure power, valves, and connections are correct. Hold [SET]+[Mode]+[Power] on the original remote; the display shows 0–99 during 7–13 min checks of sensors, wiring, refrigerant, and communication. AC beeps on success.
0 2026-01-26T13:28:05+00:00

Samsung’s Smart Install is a mandatory self diagnostic function for 2025 Samsung Inverter AC models. The basic steps on how to check smart installation in Samsung AC;

  1. Before starting Smart Install, verify all essential connections. Check that the power supply is active and steady.

  2. Ensure the service valve is completely open.

  3. Make sure the power cables for both indoor and outdoor units are connected correctly.

  4. Verify if additional refrigerant has been added for extended piping length, if applicable.

  5. Once power is supplied, the AC should remain in standby mode.

  6. Once the power is turned on, refrain from using the AC in the usual manner.

  7. The indicator on the indoor unit must display standby mode.

  8. Smart Install functions only when the AC is off

  9. Use only the original Samsung remote controller provided with the AC.

  10. Press and hold the [SET] + [Mode] + [Power] buttons together for 4 seconds.

  11. Once Smart Install starts, the remote controller will stop responding temporarily. This is normal.

  12. Throughout the process, the display on the indoor unit will read "88".

  13. A progress tally from 0 to 99 signifies that system checks are underway.

  14. The air conditioner automatically inspects sensors, wiring, refrigerant circulation, valves, and communication among units.

  15. The Smart Install process lasts around 7 to 13 minutes, varying by model.

  16. Refrain from interfering with the process or shutting off the power during this period.

  17. If the installation completes successfully, the AC will beep and go back to standby mode without showing any errors.

  18. If the installation is unsuccessful, the procedure will halt and an error code will show on the display of the indoor unit

Always complete Smart Install before using your Samsung AC to ensure safety, efficiency, and warranty compliance.

Get Your Samsung AC Installation Done Properly at a Nominal Rate Via NoBroker AC Services!

Flat 25% off on Home Painting
Top Quality Paints | Best Prices | Experienced Partners