Recently, I planned to change the under-cabinet LED strip light in my kitchen. I didn’t know how to do it, so I looked online for how to change under cabinet strip light bulb. I found some useful steps, starting with planning your layout, measuring and cutting the LED strips, cleaning the mounting surfaces, and then proceeding with the next steps. I have explained all the steps in detail below.
How to Change Under Cabinet LED Light Bulb?
First, decide where you want to place the LED strips so your countertop gets even light and no shadows.
Measure the length you need and carefully cut the strips at the marked points.
Clean the underside of the cabinets with alcohol so the strips stick properly.
Peel off the backing and stick the strips. You can also use clips or double-sided tape to make them more secure.
Connect the strips to the power supply and arrange the wires neatly.
Switch on the lights and check everything is working perfectly.
After learning about the process, I realised it’s not really a DIY task, so I hired an electrician to do it. Hope this helps you!
Hire Professional Electrician to Install an Under-Cabinet LED Light Bulb at Affordable Price.
Your Feedback Matters! How was this Answer?
Shifting, House?
✔
Lowest Price Quote✔
Safe Relocation✔
Professional Labour✔
Timely Pickup & Delivery
Intercity Shifting-Upto 25% Off
Check Prices
Intracity Shifting-Upto 25% Off
Check Prices
City Tempo-Upto 50% Off
Book Now
Hello. I wanted to change the way our kitchen looked. After considering a few options, I decided on adding strip lighting. I was surprised that it was that easy to install. However, a week ago I noticed that the lighting needed to be changed, so I did. I can thus tell you how to change under cabinet strip light bulb.
How to Change Under Cabinet Light Bulb?
Here is the process you can follow:
Ensure that the light switch is off.
Press the starter in, which will be present on one end of the strip. Turn the start clockwise until you can take it out of the slot.
Take it along to the shop and get its match there.
After you have purchased a new starter, push it back into the slot and turn it anticlockwise to lock it into place.
Your light may come with a diffuser and a plastic strip covering the bulb. If yours does, unclip it and put it to one side.
Hold the bulb from both ends and turn it by 90 degrees. You should hear a clicking sound. Move it slightly to one end and it will come out of its fitting.
To change the new bulb, hold it at both ends and ensure it is in line with the grooves in the fitting.
Turn it by 90 degrees and listen out for the clicking sound. Put the diffuser back on to cover the bulb.
Turn on the light and see if it works now.
This is all about the process. I hope it helps.
Get Light Replacement Under Cabinets Via Professional Electricians of NoBroker!
Some related information:
What is the Process of Concealed LED Ceiling Lights?
How to Change Under Cabinet Strip Light Bulb?
tareek
88 Views
2
11 months
2025-01-30T20:10:23+00:00 2025-01-30T20:10:24+00:00Comment
Share