How to Change Light Switch to Smart Switch?

Hey there, Farhan. If you are wondering how to convert normal switch to smart switch, I can surely help you out. I have converted my normal switch, which was in the bedroom, to a smart one. So, you first need to do some safety prep. Get gloves for your hands and then you can get started. I will share the method below.

How to Convert Normal Switch to Smart Switch?

1. Turn off the power to the switch. Keep the light at the switch location on and test the breaker switches until it is turned off.

2. Test the existing switch, toggling it on and off, to ensure it doesn’t turn on.

3. Remove the old switch and unscrew and pull off the wall plate and switch, but don’t pull the wires apart.

4. Disconnect the wires from the old switch and connect the wires to the new switch by matching the wire on the switch with its partner on the wall.

5. Twist together the switch wire and the wires in the wall. Use wire nuts to keep them in position and trim excess.

6. Place the wires back within the switch box and secure the switch cover in place.

7. Turn the power back on to test if the installation worked.

8. Lastly, download the switch’s app and add the new switch to your account to operate it.

This is all.

Convert Your Normal Switch to Smart Via Electricians of NoBroker!

I recently wanted to upgrade my home with smart switches. However, I wasn’t sure how to change light switch to smart switch. So, I called an electrician to help and do the job. He patiently explained every step, from selecting the right switch to installing it. He said a light switch to a smart switch can be changed by turning the power off, removing the old switch with a new one, and so on. I have shared the detailed process he followed for you.

How to Convert Light Switch to Smart Switch?

Here is the process the electrician informed me and followed.

• Know Your Existing Setup: The electrician helped me figure out the type of switch I needed. For example, a single switch for one panel or a two-row switch for two panels. It’s important to know this before buying the right smart switch.

• Turn Off the Power: He turns off the power at the fuse box. He used a voltage tester to double-check if the circuit was off to avoid any accidents.

• Remove the Old Switch: He unscrewed the wall plate and gently pried it off with a flathead screwdriver. Then he removed the old switch by unscrewing it carefully.

• Check the Wires: He inspected the wires to ensure there were no damages or frays. If you’re figuring out how to convert normal switch to smart switch, remember to check for a neutral wire. If there isn’t one, you’ll need a special smart switch.

• Install the New Smart Switch: He connected the incoming wire, outgoing wire, ground wire, and neutral wire to the corresponding spots on the smart switch.

• Connect to Wi-Fi and Test: Finally, he connected the smart switch to my home’s Wi-Fi using the app and linked it to Alexa. He tested all the features to ensure it worked perfectly.

If you want, you can follow the steps on your own, but it may be risky. I hope you understand how to change light switch to smart switch.

Hire NoBroker Electrician for Smart Switch Installation at Lowest Rate.

Also Read: 

What is a Smart Light Switch