icons

Login / Sign up

Zero Brokerage.

Thousands of new listings daily.

100 Cr+ Brokerage saved monthly.

Enter phone to continue

Change Phone
Get updates on WhatsApp

Experience The NoBrokerHood Difference!

Set up a demo for the entire community

Thank You For Submitting The Form
Q.

How to Assemble a Futon Bed?

view 37 Views

1

3 months

Comment

whatsapp [#222222128] Created with Sketch. Send

Hey. I can surely tell you how to assemble a futon bed. For assembling a futon, you will need some supplies, so check that you have all of them. In general, 2 stretchers, a seat deck, a back deck and arms are needed. Also, a variety of screws, dowels, cotter pins, sliders, allen wrenches, brackets, clevis pins and barrel nuts would be needed.


Steps to Assemble a Bi-Fold Futon Bed


  1. Begin by inserting a screw through a hole in the arm and then line the screw up with the corresponding hole in the stretcher. 

  2. Tighten the screw with your finger, but leave the connection a little loose for now. 

  3. After the arms and stretches of the futon are attached, this part of the futon is called the frame. 

  4. Continue to insert screws until there is one in every hole on the arms and the stretches are fully connected.

  5. Lay the decks on the ground and line them up along their hinge points. There are different connection methods for different models, but clevis pins and cotter pins are the most common ones. 

  6. Insert the pins into the hinge points so that the decks are held together.

  7. See if your futon has rollers attached to the back deck already. These are small and round plastic parts. If yours doesn’t, fit them into the holes on the side of the back deck.

  8. Secure the rollers with a clevis pin and a cotter pin or the given connection method.

  9. Lower the deck into the frame, placing the rollers into the grooves that run along the arms.

  10. Earlier, you left the screws attaching the arms and stretchers a little loose. After the deck is in place, tighten them. Turn them with a screwdriver till you can’t tighten anymore.

  11. Lift the deck gently and it should form a bed into a couch. If you aren't able to move it easily, your rollers may not be in position. 

  12. Ensure the futon is lying flat. Then pick up the mattress and lay it onto the flat deck of the futon.


This is all. I hope you now know how to put futon bed together.


Get Your Bed Assembled at Low Cost Via NoBroker's Carpenters


Flat 25% off on Home Painting
Top Quality Paints | Best Prices | Experienced Partners