icons

Login / Sign up

Zero Brokerage.

Thousands of new listings daily.

100 Cr+ Brokerage saved monthly.

Enter phone to continue

Change Phone
Get updates on WhatsApp

Experience The NoBrokerHood Difference!

Set up a demo for the entire community

Thank You For Submitting The Form
Q.

How to Apply Asian Paints Clear Synthetic Varnish?

view 24 Views

1

22 days

Comment

whatsapp [#222222128] Created with Sketch. Send
Summary
To apply Asian Paints clear synthetic varnish, prepare wood by cleaning and sanding with coarse, then fine grit. Stir varnish gently, apply thin coats along the grain, and let each dry. Lightly sand between coats for smoothness. Apply 2 to 3 coats, allow full curing, and work in a clean, ventilated space for a flawless finish.
0 2025-12-15T11:08:57+00:00

If you want to know how to apply Asian Paints clear synthetic varnish, follow these steps;

  1. First, give the wooden surface a thorough cleaning. Sandpaper or a scraper can be used to remove stains, dust, old polish, and grease. Sand previously coated surfaces with 80 to 100 grit sandpaper until the former finish is even and dull. To get rid of sanding dust, wipe the surface with a fresh, dry cloth.

  2. To further smooth the wood, use sandpaper with a grit of 180 to 220. This facilitates the varnish's correct adhesion. Before proceeding, make sure the surface is moisture-free, level, and dry.

  3. Give the varnish a good stir. After opening the Asian Paints Clear Synthetic Varnish container, give it a good swirl. Avoid shaking the bottle since it can produce bubbles that will ruin the finish.

  4. Apply the initial coat. Use a high-quality foam or bristle brush. Apply a thin, uniform layer along the wood's grain direction. Don't brush too much because it can leave marks. Give the first coat six to eight hours to dry.

  5. Sand in between coats in step five. To get rid of little flaws, softly smooth the surface with 320 grit sandpaper after the first layer has dried. Once more, wipe clean.

  6. Apply the second coat. Apply a second thin layer. You can repeat the gentle sanding procedure and then add a third layer for a glossier, richer finish.

  7. Let it dry completely. Before using or putting anything on the surface, give the last layer a full day to cure.

For best results, apply varnish in a dust-free, well-ventilated area to avoid bubbles or uneven patches.

Get NoBroker Painting Experts to Apply Asian Paints Clear Synthetic Varnish Perfectly

Flat 25% off on Home Painting
Top Quality Paints | Best Prices | Experienced Partners