How to Adjust Self Closing Cabinet Door Hinges?

My kitchen doors had begun to sag and would not close correctly, so I had to tighten the hinges on my self-closing cabinet doors. But how to adjust self closing cabinet door hinges? Since I'm not very knowledgeable about hinge mechanisms, I hired a professional carpenter to complete the work. It is usually possible to fix self-closing (soft-close) cabinet hinges without replacing the hardware by making a few minor adjustments. You will need a screwdriver, painter's tape, and a small ruler for this step.

How to Adjust Self Closing Cabinet Hinges?

The basic steps that are involved;

1. Verify alignment: To make sure there is consistent space between the doors, the professional first measured the distance.

2. Adjustment from side to side: He used a screwdriver to tweak the lateral screw, which fixed overlaps and ensured that doors sat evenly.

3. In and out movement: He made sure the doors closed completely with a smooth, soft-close action by adjusting the depth screw.

4. Up and down adjustment: The door could be slightly raised or lowered by loosening the mounting plate screws.

5. Adjusting the damper: He made adjustments to the integrated soft-close damper to ensure that the door closed softly and without banging.

Though this was a small change, it restored my cabinets' order, alignment, and functionality.

Hire Expert Carpenters from NoBroker to Install/Repair Door at a Nominal Rate!

Hello. I would like to help you with how to adjust self closing cabinet door hinges. There are several ways to adjust the self closing door hinges, but you will have to try and see which method works for you. So, what I will do is list a few methods and you can try them and hopefully one of them will work for your cabinet door hinges.

How to Adjust Self Closing Cabinet Hinges?

1. Look at the hinges closely and check each screw; tighten those that need it with a screwdriver.

2. You can spray some oil if the hinges don’t close automatically. Applying lubricants helps remove all the junk and stuff that might be clogging the crucial areas of the hinges. 

3. After you are done spraying, grab a piece of dry cloth and wipe off any excess traces of the lubricant. See if the door can close on its own and if there is still no positive response from the hinges, unscrew the complete hinge and do the process again.

4. Take a cooker and fill it with water. Add a couple of spoons of liquid laundry detergent and place the unscrewed hinge in the mixture and keep the cooker on medium heat. Let it soak overnight and you can wipe the hinge later.

5. If all the above methods fail, what you can do is locate the adjustment screws between either the top or bottom hinge. A single move can adjust the door to lean towards the right or left. While another can move the door away from or closer to the cabinet.

This is all from my end. I hope this helps.

Get Your Door Hinges Adjusted by Expert Carpenters of NoBroker!