Can you replace refrigerator doors?

Many people wonder, can you replace a fridge door. The answer is yes, but it is usually best to hire a professional. When I had mine replaced, I watched closely to understand the process. The technician began by unplugging the fridge and turning it off, then disconnected the water supply. Next, he emptied all the food and bins inside, which made removing the door much easier. I have shared the entire process below.

Get Free Estimate

How can You Replace Fridge Doors?

Here are the replacement steps for the fridge door that the technician performed.

1. He started by unplugging the unit and turning it off, then disconnected the water supply, something I hadn’t realized was such an important safety step.

2. After that, he cleared out all the food and bins inside the fridge, which made sense before taking the door off.

3. At the joint, I watched him press down on the collet and pull out the water hose. He made it look easy, but I could tell it took precision.

4. He unscrewed the water line cover and removed it, revealing more internal parts than I expected.

5. Then he went for the top hinge cover screws. Once the cover came off, I could see the wire harness tucked underneath.

6. I watched him unplug each wire carefully. There was even a tiny screw holding the ground wire in place, he removed that too with precision.

7. He then carefully pulled out the water line hose, making sure not to damage it.

8. After that, he turned the hinge lever to unlock the top hinge. 

9. Holding the freezer door steady, he carefully slid the hinge out, working it over the wires and water hose. Then he gently lifted the door off the bottom hinge pin. To keep it from getting scratched, he laid it down on a towel.

10. Once the new door was ready, he started reinstalling everything: wires, hoses, screws, all in reverse order.

Hope my experience gives you a clear picture of what is involved.

Get Affordable and Reliable Refrigerator Repair Service by Experts at NoBroker

Read More:

How to Repair Fridge Compressor?

. I got my fridge door replaced last year. However, I must tell you that the process may vary depending on the specific model of your refrigerator. 

I got it replaced with the help of an electrician. I booked the refrigerator-specific electrician service from NoBroker where they came and diagnosed the refrigerator to identify repairs. Although, I should tell you that the spare door was chargeable. 

Process of Replacement Refrigerator Doors

I will tell you the steps the electrician followed.

• Powering Down and Unplugging:

  They first disconnected the refrigerator from the power source to prevent any electrical hazards.

• Removing the Existing Doors:

  Then carefully they removed the screws and detach the door from the refrigerator and disconnected any electrical wires or cables that were connected to the old doors.

• Removing the Old Hinges:

  After that, they unscrewed the old hinges and aligned the new hinges with the mounting points on the refrigerator frame. 

• Attach Replacement Doors:

  They carefully lifted and attached it. Following that, they attached any electrical wires or cables that were disconnected from the old doors. 

• Level the Doors:

  They also used a level to check if the doors were hanging evenly and then reinstalled any handles, shelves, or drawers that were removed during the process. 

• Power On and Check Functionality:

  After all this, they plugged the refrigerator back into the power source and turned it on. Check that the doors open and close smoothly, and that the refrigerator is functioning properly.

Now you know can you replace a fridge door or not.

It's critical to keep in mind that you can always reverse the door of your refrigerator. As a result, even an outdated refrigerator can be easily replaced to fit your needs. Because I have done it 2-3 times in my home. So I can guide you well on can you replace refrigerator doors.

Get Free Estimate

Fridge Door Replacement Guide:

1) Before you begin the task, the refrigerator must first be totally unloaded and disconnected. This is the first stage in changing the refrigerator door. Both an icemaker and a water dispenser are typically found on refrigerator doors. 

2) When you have unplugged everything, you may begin removing the door. You must take off the refrigerator's foot panel and bottom latch in sequence. Before you remove the foot panel, use a screwdriver to remove the screws holding it in place.

3) After you take off the foot panel, the waterline needs to be disconnected before the door can be taken off its frame. Make sure the cloth is positioned beneath the tube to absorb any water that could be spilt during the procedure. This is one of the main factors to consider when you are doing mini fridge freezer door replacement.

4) It's crucial to separate the door after unplugging the water tube. You need to look at the top of the refrigerator to locate the door latch. Use the proper screwdriver for the screw type to loosen the screws so you can take the door off.

5) Raise the door off of the bottom spindle after removing the screws from the top frame. If the door is really bulky, you might need extra assistance lifting it. 

6) You need to replace the door after your repairs are complete. The water dispenser tube must first be positioned correctly in order for it to be connected to the waterline at the bottom. Make sure the connection is secure and there is no possibility of leakage.

7) Rejoin the top of the refrigerator door to the frame after the bottom has been repaired, and secure the screws using a screwdriver. Before securing the latch securely on top, ensure that the refrigerator door is even. You need to reattach the foot panel as the final step, and then your refrigerator door is ready to use. Now you know can you replace the doors on a refrigerator.

I hope I answered your question can you replace refrigerator doors in an informative manner.