Can You Paint Door Handles?

Right now, painting work is going on in my house. I asked my painter, can you paint door handles? He said, Yes. It is allowed to spray paint door handles. But to get a smooth and long-lasting finish, you need to prepare them properly and use the right paint. Otherwise, the paint may chip or look uneven. With proper care, your door handles can look fresh and new for a long time.

How can Door Handles be Painted?

1. First, you should spray them with a metal primer. 

2. Let the primer be completely dry.

3. Spray the handles with paint that is made for metal surfaces. 

4. Finally, let the handles dry completely, usually for about 24 hours, before putting them back on the door. 

Following these steps gives the door handles a smooth, fresh, and long-lasting finish. I hope you found the seps helpful if you want to try it at home.

Get Your Door Handles Painted Professionally at Low Cost with NoBroker Painting Service

If your mind has the same question, “Can you paint door handles?” which I had in the past, let me tell you that yes you can paint your door handles. I was bored of watching the same old door knobs for years. So, I gave it a fresh look. Here I have mentioned the steps to follow.

Can You Paint Brass Door Handles

• Remove the door handles from the doors. This allows for even painting and prevents paint from getting onto the door or surrounding areas.

• Clean the handles with soap and water to remove dirt, grime, or oils. Rinse and let them dry completely. If handles are metallic, use a degreaser for a more thorough clean.

• Lightly sand the handles with fine-grit sandpaper (around 220 grit) to create a surface that the paint can adhere to. This is especially important for metal handles.

• Apply a suitable primer, especially if the handles are made of metal or plastic. This step helps the paint adhere better and ensures a more even finish. Use a primer designed for the material of your handles.

• Use a high-quality spray paint or paint designed for metal or plastic. Apply thin, even coats to avoid drips and runs. Allow each coat to dry completely before applying the next.

• Once dry, apply a clear sealer if needed to protect the paint from wear and tear. Reattach the handles once the paint is fully dried.

I hope you understand the steps. In case you are worried, you can always hire professional painters to do it.

Read More

I have asked this question, “can you paint door handles” in the past myself. The answer is yes. It is not rocket science to actually get the job done. You just need to be a lil careful and with the right tools at hand, you will have door handles and door knobs that look as good as new. Just know that you should check the material of your door knobs and handles before getting on with the painting part. Let me share my experience with you here.

Can You Paint Door Knobs?

As I said, you can paint your door knobs. Be it metal door knobs or brass door knobs, you can paint them right by following a few simple steps. Let me give you a quick guide.

Can You Paint Brass Door Handles?

To paint brass door handles and knobs, 

1. First, take a screwdriver and take the handles and knobs out of the door.
2. Once done, wipe them clean. Ensure there is no dirt, dust or grease sitting on them.
3. Now, take a steel brush or light sanding paper to even out the painting surface on handles and knobs.
4. You can choose to apply a primer or directly apply enamel paint

I chose enamel based paint for a smooth finish. My suggestion is to apply spray paint for even layers of paint.

Can You Metal Door Handles?

The door to my washroom had metal door handles unlike other door handles. I opted for an appliance epoxy for it. You can continue with the enamel spray paint as well. 

Follow the same steps, as mentioned above and you’ll have renewed door handles with you. Let them dry properly and then fix them back in the doors.

You can choose to opt out of this hassle by actually getting your door handles and knobs painted by professionals. 

It took me a day to get through the whole process myself. Professional painters will do it in just a couple of hours.

Read more: